JFC0603-1700FS

Introduction         The AWU is used to provide an internal wake-up time reference when the MCU enters the low-power Active Halt mode. The clock of this time reference is provided by the internal low...[Details]

Abstract: This article uses the ATmega8 microcontroller as the core to design a distributed, modular electric vehicle battery management system that communicates through LIN bus and has intelligent ch...[Details]

My recent project used win10+stlink v2 (a copycat bought from Taobao)+stm8s103F3 and encountered many problems. Here is a summary of my problems. 1. Win10 cannot install the stlink driver (error co...[Details]

I. Overview   MSP430F149 has three clock sources: external LF (XT1 is generally 32.768K), HF (XT2 is generally 8M), internal DCO. Three clock signals can be obtained from the clock system module: MCL...[Details]

Preliminary knowledge - program memory allocation The memory occupied by a program compiled by C/C++ is divided into the following parts: Stack area (stack) - automatically allocated and released by ...[Details]

Many experts on the Internet have analyzed the interrupt problem of S3C6410. Here I will mainly analyze the S3C6410 implementation process and the simple program I have written. I use the k1 key of m...[Details]

0 Introduction Single-chip microcomputer data acquisition system refers to a system that uses single-chip microcomputers to collect, store, display and transmit various signals on site, includi...[Details]

1 Introduction A digital signal processor (DSP) is a microprocessor suitable for implementing various digital signal processing operations. It has the following main structural features: (1) It...[Details]

1. Function The function of the S3C2440 memory controller is to provide control signals to externally expanded storage devices. The external expansion storage devices supported by the memory controll...[Details]

Timer Interrupt 　　The timer function of STM32 is very powerful. There are advanced timers such as TIME1 and TIME8, general timers such as TIME2~TIME5, and basic timers such as TIME6 and TIME7. In th...[Details]

In order to systematically learn the development of embedded systems, I bought a JZ2440 from Weidongshan, and the journey into the pit began~ 1. Development Board The development board is as exquis...[Details]

S3C2410 is a RISC microprocessor based on ARM920T core produced by Samsung, with a main frequency of up to 203MHz, suitable for information appliances, Smart Phones, Tablets, handheld devices, mobi...[Details]

1.TQ2440u-boot-1.1.6 modify the file path is u-boot-1.1.6includeconfigsEmbedSky.h #defineLCD_TFTxxx (LCD type) W353.5 inch TFT4802724.3 inch TFT8004807 inch TFT80060010.4 inch VGA1024768VGA1024*768 ...[Details]

1.Page Read The table below illustrates the internal structure of NAND FLASH. The first 2K (02047) represents page data, and the following 64 bytes (20482111) represents oob. The CPU wants to read ...[Details]

;******************************************* ;MCU-PIC16C63A,WDT=ON,HS,16MHZ ;This example sends the data in registers BUFFER1 and BUFFER2 through the serial port. There is no interrupt call. The micr...[Details]