F-219 (Rev 05MARB19)
ECUO–Y12–14–017–0–3–1–1–21
ECUO SERIES
OPTICAL MICRO FLYOVER ASSEMBLY
®
FEATURES
•
Standard Temperature
range from 0 °C to +70 °C
•
Interchangeable with
FireFly
™
copper using
the same micro
connector system
•
x4 & x12
•
14 Gbps, 16 Gbps,
25 Gbps and 28 Gbps
•
Proven 850 nm
VCSEL array
•
Cost-effective
multi-mode fiber
•
Integral heat sink
•
Angled fiber exit
from the housing to
minimize keep-out zone
on the board
•
Bend Radius: 7.5 mm
•
Supports data center and
HPC protocols, including:
Ethernet, InfiniBand
™
,
Fibre Channel, PCIe
®
.
(See firefly@samtec.com)
•
Evaluation & development
boards available
Mates with:
UEC5, UCC8, OPA
Choice of cable
construction
and passive
end options
INSERTION TOOL
• CAT-IN-ECUO-02
APPLICATION
Multiple standard
and custom heat
sinks
Rugged
latching
system
IN DEVELOPMENT
Rugged two-piece
connector system
with positive latching
• Other fiber types
• Submersible FireFly
™
Contact firefly@samtec.com
ECUO
WIDTH
DATA
RATE
CABLE
LENGTH
0
HEAT
SINK
1
FIBER
TYPE
END
OPTION
SPECIFICATIONS
For complete specifications
see www.samtec.com?ECUO
= x12 Tx
Simplex Optical
–T12
= 14 Gbps
per lane
–14
–16
–25
–28
= x12 Rx
Simplex Optical
–R12
–Y12
= Overall Length
in Centimeters
(011 cm to
999 cm)
(Minimum length
will depend on
fiber type and
End 2 option
specified.)
–“XXX”
= Flat
–1
–2
–3
–4
–5
= OM3 Low
Bend Radius
Ribbon
–1
–2
–Y12 requires –2(X) options*
= 16 Gbps
per lane
(x12 only)
= Pin-fin
(–14 & –16 only)
Class 1 LASER PRODUCT
per IEC 60825-1 Ed. 2 (2007)
= x12
Duplex Optical
(Y Configuration)
ELECTRICAL
SOLUTIONS
• Performance to 28 Gbps
• Easily upgrade to optical
with same connector system
See ECUE Series.
MTP
®
is a registered
trademark of US Conec Ltd.
Patents:
8588562, 8588561
Additional patents pending
Note:
All FireFly
™
designs,
specifications and components
are preliminary and subject to
change without notice.
= x4
Duplex Optical
–B04
= 25 Gbps
per lane
(x4 only)
= Flat with 3-Rib-
bon
pass- through
= OM3 Low
Bend Radius
Loose Tube
= MTP
®
12F
key down,
male
–01
–02
–05
–06
= MTP 24F
key down,
male
–21*
–22*
–25*
–26*
= MTP
®
12F
key down,
female
= MTP
®
24F
key down,
female
= PCIe
®
Pin-fin
(–14 & –16 only)
= 28 Gbps
per lane
(x4 only)
= MT 12F
male
= MT 24F
male
= Pin-fin
(–28 only)
= MT 12F
female
= MT 24F
female
CABLE LENGTH
(10.80)
.425
(15.48)
.609
(17.56)
.691
–01 (MTP
®
MALE SHOWN)
(5.76)
.227
–1 FLAT HEAT SINK
(7.40)
.291
–3 FLAT PASS-THROUGH
HEAT SINK
(with fiber groove for
multi-row configuration)
–06 (MT FEMALE SHOWN)
–2 PIN-FIN HEAT SINK
Due to technical progress, all designs, specifications and components are subject to change without notice.
All parts within this catalog are built to Samtec’s specifications.
Customer specific requirements must be approved by Samtec and identified in a Samtec customer-specific drawing to apply.
WWW.SAMTEC.COM