Other Rectangular Rosette Patterns
General Purpose
Strain Gages
General Purpose
Strain Gages
GAGE PATTERN
GAGE SERIES
See Note 1
GAGE RESISTANCE
(OHMS)
GAGE LENGTH
inches
millimeters
015RC
EA,
SA
120
0.015
0.38
actual size
Micro-miniature three-element 45° rosette with one tab common to all sections.
See also 015RJ pattern. Note: See Strip Patterns datasheet for discussion of
common-tab gages.
Matrix size: 0.18L x 0.23W in. (4.6L x 5.8W mm)
015RJ
actual size
EA,
SA
120
0.015
0.38
Micro-miniature three-element 45° rosette. Similar to 015RC pattern except
each section has separate tabs for electrical isolation.
Matrix size: 0.19L x 0.23W in. (4.8L x 5.8W mm)
030WR
actual size
WA,
WK,
SA, SK
120
0.03
0.76
Miniature three-element 45° rectangular stacked rosette.
Matrix size: 0.18L x 0.19W in. (4.6L x 4.8W mm)
031RB
actual size
EA, EP,
SA
120
0.031
0.79
Miniature 45° rectangular single-plane rosette with compact geometry.
Matrix size: 0.19L x 0.24W in. (4.8L x 6.1W mm)
062RB
EA,
WA,
WK, EP,
SA, SK
120, 350
0.062
1.57
actual size
Small 45° rectangular single-plane rosette with compact geometry.
Matrix size: 0.42L x 0.46W in. (10.7L x 11.7W mm)
062RF
EA,
SA
350
0.062
1.57
actual size
Small 45° rectangular single-plane rosette designed for use with Option W.
Matrix size: 0.25L x 0.46W in. (6.4L x 11.7W mm)
Note 1:
Products with designations and options shown in
bold
are not RoHS compliant.
See http://www.vishaypg.com/micro-measurements/stress-analysis-strain-gages/other-rectangular-rosettes/ for complete
specifications.
Document No.: 11323
Revision: 17-Nov-2015
For technical questions, contact
mm@vpgsensors.com
www.micro-measurements.com
1
Other Rectangular Rosette Patterns
General Purpose Strain Gages
GAGE PATTERN
GAGE SERIES
See Note 1
WA,
WD, WK,
SA, SK,
SD
GAGE RESISTANCE
(OHMS)
GAGE LENGTH
inches
millimeters
120WR
120, 350
0.12
3.05
actual size
Three-element 45° rectangular stacked rosette.
Matrix size: 0.34L x 0.40W in. (8.6L x 10.2W mm)
125RD
EA,
WA, SA
350
0.125
3.18
actual size
General-purpose three-element 45° rectangular rosette. Similar to 125RA
pattern except for grid resistance.
Matrix size: 0.40L x 0.47W in. (10.1L x 11.9W mm)
250RA
EA,
WA,
WK, EP,
SA, SK
120, 350
0.25
6.35
actual size
Large three-element 45° rectangular rosette with convenient solder tab
arrangement. See also 250RD pattern.
Matrix size: 0.78L x 0.93W in. (19.8L x 23.6W mm)
EA, EK,
S2K, WA,
WK,
EP,
SA, SK
250RD
350, 1000
0.25
6.35
actual size
Large three-element 45° rectangular rosette. Similar to the 250RA pattern
except for resistance. EK-Series gages are supplied with duplex copper pads
(DP) when optional feature W or SE is not specified.
Matrix size: 0.78L x 0.93W in. (19.8L x 23.6W mm)
WA,
WD, WK,
SA, SK,
SD
250WR
120, 350
0.25
6.35
actual size
Three-element 45° rectangular stacked rosette.
Matrix size: 0.51L x 0.60W in. (13.0L x 15.2W mm)
Note 1:
Products with designations and options shown in
bold
are not RoHS compliant.
See http://www.vishaypg.com/micro-measurements/stress-analysis-strain-gages/other-rectangular-rosettes/ for complete
specifications.
www.micro-measurements.com
2
For technical questions, contact
mm@vpgsensors.com
Document No.: 11323
Revision: 17-Nov-2015
Legal Disclaimer Notice
Vishay Precision Group, Inc.
Disclaimer
ALL PRODUCTS, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE.
Vishay Precision Group, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “VPG”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in
any other disclosure relating to any product.
The product specifications do not expand or otherwise modify VPG’s terms and conditions of purchase, including but
not limited to, the warranty expressed therein.
VPG makes no warranty, representation or guarantee other than as set forth in the terms and conditions of purchase.
To the maximum extent permitted by applicable law, VPG disclaims (i) any and all liability arising out of the
application or use of any product, (ii) any and all liability, including without limitation special, consequential or
incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose,
non-infringement and merchantability.
Information provided in datasheets and/or specifications may vary from actual results in different applications and
performance may vary over time. Statements regarding the suitability of products for certain types of applications
are based on VPG’s knowledge of typical requirements that are often placed on VPG products. It is the customer’s
responsibility to validate that a particular product with the properties described in the product specification is suitable for
use in a particular application. You should ensure you have the current version of the relevant information by contacting
VPG prior to performing installation or use of the product, such as on our website at vpgsensors.com.
No license, express, implied, or otherwise, to any intellectual property rights is granted by this document, or by any
conduct of VPG.
The products shown herein are not designed for use in life-saving or life-sustaining applications unless otherwise
expressly indicated. Customers using or selling VPG products not expressly indicated for use in such applications do
so entirely at their own risk and agree to fully indemnify VPG for any damages arising or resulting from such use or sale.
Please contact authorized VPG personnel to obtain written terms and conditions regarding products designed for such
applications.
Product names and markings noted herein may be trademarks of their respective owners.
Copyright Vishay Precision Group, Inc., 2014. All rights reserved.
Document No.: 63999
Revision: 15-Jul-2014
www.vpgsensors.com
1
/201809303368624_pdf/pg_0001.png)
ARM Technology
京公网安备 11010802033920号
EEWORLD/201809303368624_pdf/1.png)
/201809303368624_pdf/2.png)
/201809303368624_pdf/3.png)
/201809303368624_pdf/pg_0002.png)
/201809303368624_pdf/pg_0003.png)
