Micron’s RealSSD™ C400 SSD is available in different configurations and densities. Visit
www.micron.com
for a
list of valid part numbers.
Figure 1: Part Number Chart
MT FD
Micron Technology
Product Family
FD = Flash drive
D
AA xxx M AM - 1
K
1
x
xx
ES
Production Status
Blank = Production
ES = Engineering sample
Operating Temperature Range
Drive Interface
D = SATA 6.0 Gb/s
Blank = Commercial (0°C to +70°C)
Hardware Feature Set
Blank = Null
AA = Contact factory
AB = Contact factory
AC = Contact factory
Drive Form Factor
AA = 1.8-inch (5mm)
Drive Density
128 = 128GB
256 = 256GB
512 = 512GB
Firmware Feature Set
Blank = Null
1 = Contact factory
2 = Contact factory
NAND Flash Type
M = MLC
BOM Revision
1 = 1st generation
Product Family
AM = C400
NAND Flash Component
J = 32Gb, MLC, x8, 3.3V (25nm)
K = 64Gb, MLC, x8, 3.3V (25nm)
Sector Size
1 = 512-byte
Warranty:
Micron makes no warranties, expressed or implied, including, but not limited to, any implied warranties of merchantability, fitness for a par-
ticular purpose, other warranties that might arise from course of dealing or custom of trade other than that micron warrants only that the product com-
plies with Micron's specification sheet for the product at the time of delivery, provided that deviations from specifications which do not materially affect
performance of such product in the system and configuration in or for which it is initially installed or qualified by customer shall not be deemed to
constitute failure to comply with such specifications. Any claim against Micron must be made within three (3) years from the date of shipment by Micron
and Micron has no liability thereafter. Micron's liability is limited to repair or replacement of the defective product or credit or refund of the purchase
price of the defective product, provided that Micron may elect refund in lieu of credit, replacement or repair.
PDF: 09005aef84559b2a
realssd_c400_1_8.pdf - Rev. D 09/11 EN
2
Micron Technology, Inc. reserves the right to change products or specifications without notice.