Technical Data Sheet Draft
CABLE ASSEMBLY
ROPD FEMALE CONNECTOR
C003-MB-XXX-Y
Dieses Dokument ist urheberrechtlich geschützt
●
This document is protected by copyright
●
Rosenberger Hochfrequenztechnik GmbH & Co. KG
All dimensions are in mm; tolerances according to ISO 2768 c-H
Range length "A"
Tolerance for "A"
100 to 1000
±5
cable length [mm]
1001 to 2000
± 10
2001 to 5000
± 20
> 5000
± 1%
General Information
RoPD cable assembly with break-off plug consisting of
Break-off plug with magnets
Cable
Second side
Color
Connector jack, straight
RTK-MI 01
Open
White, similar RAL 9003
RF_35/05.10/6.0
Rosenberger Hochfrequenztechnik GmbH & Co. KG
P.O.Box 1260
D-84526 Tittmoning
Germany
www.rosenberger.de
Tel. : +49 8684 18-0
Fax : +49 8684 18-499
Email : info@rosenberger.de
Page
1/5
Technical Data Sheet Draft
CABLE ASSEMBLY
ROPD FEMALE CONNECTOR
Technical Data break-off plug
C003-MB-XXX-Y
Dieses Dokument ist urheberrechtlich geschützt
●
This document is protected by copyright
●
Rosenberger Hochfrequenztechnik GmbH & Co. KG
Pin
1
2
3
4
5
6
colour
green
blue
orange
brown
red
black
cable cross section
0.35 mm²
0.35 mm²
0.35 mm²
0.35 mm²
2.5 mm²
2.5 mm²
All dimensions are in mm; tolerances according to ISO 2768 m-H
Interface
According to
Rosenberger Standard
RF_35/05.10/6.0
Rosenberger Hochfrequenztechnik GmbH & Co. KG
P.O.Box 1260
D-84526 Tittmoning
Germany
www.rosenberger.de
Tel. : +49 8684 18-0
Fax : +49 8684 18-499
Email : info@rosenberger.de
Page
2/5
Technical Data Sheet Draft
CABLE ASSEMBLY
ROPD FEMALE CONNECTOR
Material and Plating break-off plug
Connector parts
Housing
Dielectric
Sealing
Magnets
Bend protection, overmolded
Pins 1-4, spring loaded contacts
Piston
Ferrule
Spring
Pins 5-6
Power Pin
Power Contact
Material
PBT
PBT
VMQ Silicone
NdFeB
TPU
Plating / Color
White, similar RAL 9003
White, similar RAL 9003
Nickel plated
White, similar RAL 9003
C003-MB-XXX-Y
Dieses Dokument ist urheberrechtlich geschützt
●
This document is protected by copyright
●
Rosenberger Hochfrequenztechnik GmbH & Co. KG
Material
Plating / Color
Brass
Gold plated
Brass
Gold plated
Stainless steel wire
Material
Plating / Color
Brass
Silver
Beryllium copper Silver
Cable
RTK-MI 01
Flammability rating
Connector parts
Housing
Dielectric
Sealing
Bend protection
Cable
*Please note that a non UL rated color batch is added
Category
Uncolored raw material acc. to UL94 V-0*
Uncolored raw material acc. to UL94 V-0*
Uncolored raw material acc. to UL94 HB*
Uncolored raw material acc. to UL94 HB*
UL-Style 21328 (80 °C/150 V)
RF_35/05.10/6.0
Rosenberger Hochfrequenztechnik GmbH & Co. KG
P.O.Box 1260
D-84526 Tittmoning
Germany
www.rosenberger.de
Tel. : +49 8684 18-0
Fax : +49 8684 18-499
Email : info@rosenberger.de
Page
3/5
Technical Data Sheet Draft
CABLE ASSEMBLY
ROPD FEMALE CONNECTOR
Electrical data
Pins 1-4
Insulation resistance
Contact resistance
Working voltage
Max. Current
Pins 5-6
Insulation resistance
Power current
Contact resistance
Working voltage
≥
1 x100 MΩ
≤
40 mΩ initial
12 V
2 A per pin
≥
1 x100 MΩ
≤
30 A DC
≤
7 mΩ
≤
60 V DC
C003-MB-XXX-Y
Dieses Dokument ist urheberrechtlich geschützt
●
This document is protected by copyright
●
Rosenberger Hochfrequenztechnik GmbH & Co. KG
Warning!
Customer is responsible for implementing adequate safety measures:
Power supply to Pins 5 & 6 must be deactivated unless they are completely
plugged in.
Power to pins 5 & 6 must only be activated upon full insertion of signal pins 1 - 4.
Misuse may damage contact!
Mechanical data
Mating cycles
Disengagement force each contact
min. 2.500
min. 25 N
Environmental data
Temperature range
Thermal shock
Temperature and humidity
Vibration resistance
Shock resistance
Mechanical Shock
High-Temp. Exposure
Dust and water resistance clip on port
-40 °C to +65 °C
DIN IEC 60068-2-14 Test NA
DIN EN 60068-2-30 (2)
3 axes, 6h, 10Hz-180Hz, 12.38m/s²
3 axes, 150 shocks, 6ms, 30g
DIN IEC 60068-2-27
DIN IEC 60068-2-2
DIN 60529 IP64/IP67
Compliance
RoHS
compliant
RF_35/05.10/6.0
Rosenberger Hochfrequenztechnik GmbH & Co. KG
P.O.Box 1260
D-84526 Tittmoning
Germany
www.rosenberger.de
Tel. : +49 8684 18-0
Fax : +49 8684 18-499
Email : info@rosenberger.de
Page
4/5
Technical Data Sheet Draft
CABLE ASSEMBLY
ROPD FEMALE CONNECTOR
Packing
According to VK 18.0000
Packaging Instruction for standard packaging of components
with magnets.
Packing unit depends on cable length, max. 8kg
C003-MB-XXX-Y
Dieses Dokument ist urheberrechtlich geschützt
●
This document is protected by copyright
●
Rosenberger Hochfrequenztechnik GmbH & Co. KG
Preliminary
Caution!
Magnets can impact the function of pace makers and implantable cardioverter-
defibrillators (e.g. actuation of reed switch). Keep a minimum distance of 0.2 m
(20 cm) between the magnetic connector and the implanted devices to prevent
malfunction and danger to health.
While the information has been carefully compiled to the best of our knowledge, nothing is intended as representation or warranty on
our part and no statement herein shall be construed as recommendation to infringe existing patents. In the effort to improve our
products, we reserve the right to make changes judged to be necessary.
Draft
T. Scheuerlein
Date
02.02.17
Approved
T. Scheuerlein
Date
03.05.17
Rev.
100
Engineering change number
17-v316
Name
A.
Streibl
Date
03.05.17
RF_35/05.10/6.0
Rosenberger Hochfrequenztechnik GmbH & Co. KG
P.O.Box 1260
D-84526 Tittmoning
Germany
www.rosenberger.de
Tel. : +49 8684 18-0
Fax : +49 8684 18-499
Email : info@rosenberger.de
Page
5/5