Automatic reset thermostat designed to meet your specific application requirements. Its patented and tamper proof snap action bi-metal disc provides reliable and
repeatable switch actuation. The 3NT is suitable for electrical loads ranging from dry circuits to 10A @ 240 VAC.
The core of the 3NT is the proven 1NT thermostat. Recognized by UL/CSA and KEMA/ENEC agencies, hundreds of millions of the 1NT device are in the field today used
in a variety of HVAC, appliance, automotive and specialty applications.
Manufactured at ISO 9001 certified manufacturing sites, its dry seal allows direct integration of the thermostat into a wire harness eliminating the need for extra
connections.
Features
• Automatic reset
• Small and easy to mount
• Fast thermal response
• Innovative dry seal design - protects from moisture and dust
• Reliable 100K cycle life
• High temperature - to 275ºF (135ºC)
Applications
• HVAC
• Commercial
• Dehumidifiers
• Freezers
• Heat pumps
• Ice makers
• Refrigerators
• Condensing or moist environments
SPECIFICATIONS
Agency
UL
(USA, Canada)
Cycles
x1000
100
100
30
30
100
30
Volts
120 Vac
240 Vac
120 Vac
240 Vac
30 Vdc
240 Vac
FLA
5.8
2.9
10.0
10.0
LRA
34.8
17.4
40.0
40.0
Amps
(resistive)
10
10
1
16
VA
125
125
Electrical Ratings
ENEC (Europe)
Operating Temperature
Ambient Temperature
Temperature rating
Minimum Nominal Temperature
Differential
Dielectric Strength
Standard Wire Leads
-20 to 135ºC (-4 to 275ºF)
-40ºC to maximum wire lead insulation
PVC - 105ºC
XLP - 125ºC
(Allow 15ºC de-rating below wire insulation rating at maximum 10A current)
8ºC (15ºF)
750 Vrms
1500 Vrms terminals to case
18 AWG (1/32” or 1/16” wall thickness in either 105°C PVC or 125°C XLPE)
Do not plug or unplug while power is on
Do not plug or unplug while power is on
Do not plug or unplug while power is on
I have to say it three times. Although it is fine after plugging and unplugging ...
The C2000 microprocessor with C28x+FPU architecture adds some registers and instructions to the original C28x fixed-point CPU to support IEEE single-precision floating-point operations. The floating-p...
Hello everyone, I just started using Kicad. When drawing a PCB, I want to drag the lines, but the lines are disconnected (as shown below). Can the entire line be linked like AD?...
I am going crazy. The problem now is that I use the serial debugging assistant to debug. The development environment ranges from IAR low version to high version and CCS. The programs are official prog...
According to the official website of the National Medical Products Administration, according to Announcement No. 38 (hereinafter referred to as Announcement No. 38) issued in 2017 by the former Minist...
DSP and ARM Processors
京公网安备 11010802033920号
EEWORLD
