[size=4]When COMS meets TTL, there is only confusion at this stage, because there is no rational understanding of the connection and difference between the two. For this reason, let's make a small com...
For combinational logic circuits, latches should be avoided. In the last test, I used a lookup table that displays octal numbers to pave the way for this test. This test is to test the latch detection...
The core content of "Modeling and Evaluation of Real-time Systems in Automotive Electronic/Electrical Architecture" is to model and evaluate within the scope of automotive electronic/electrical archit...
Is there any example code for c8051f040 CAN communication, preferably with comments, or some information about it? This is my first time to use CAN communication, so please give me some advice! !...
Since the SPI chip select pin of DSP28335 can only be pulled high after more than 20us after sending, the IO port is used to simulate SPISTE. The timing diagram obtained is as follows (sending two AA ...