Datasheet for part number MS3102E20-22P
Our Catalog Part Number: MS3102E2022P
Our Global Manufacturing Part Number: 024253-0055
Brand: Cannon Product Category: Circular Product Line: MIL-DTL 5015 Series I Series: MIL-C-5015
Product Datasheet
Thread
Shell Style
Gender
Shell Size
Contact Arrangement
Number of contacts
Contact Type
Contact Plating
Contacts installed
Shielding
Contact Rating at +20 °C (68 °F)
(Size 15/15S/16/16S)
Contact Rating at +20 °C (68 °F)
(Size 60/100/8)
Contact Resistance
(Size 15/15S/16/16S)
Contact Resistance (Size 60/100/8)
Operating Voltage
Connector with threaded coupling
Box mounting receptacle
Pin
20
20-22
3 contacts size 8, 3 contacts size 16
Solder Cup
Hard silver
yes
no
22 A
74 A
6 mΩ
1 mΩ
In case of voltages greater than 50V the connector
must be used in accordance with DIN VDE part 410,
IEC 60364-4-41.
Acc. To VG95319, part 2, test no. 5.12
and VG95210, part 32, test conditions B,
standard insulator material > 1000 MΩ
1600 Vrms
1,1 mm
Standard insulator material -55°/+125°C
(-67/257°F)
IP65 acc. to DIN 40 050
500 hours salt spray resistant
500 min
1,0 N
3,0 N
For infos on Gage please see catalog
VG95234, part 1
Closing: 9 Nm max / Opening: 0,7 Nm min
35 N
80 N
Aluminium alloy
Olive drab chromate coating over cadmium plating
Neoprene
Copper alloy
See assembly instruction
See assembly instruction
Insulator Resistance
Test Voltage
Air and Creepage Paths (Min)
Ambient Temperature
Safety Provisions
Salt Spray Resistance
Mating Cycles
Sep. Force per Contact
(Size 15/15S/16/16S)
Sep. Force per Contact (Size 60/100/8)
Gage
Coupling Torque
Contact Retention
(Size 15/15S/16/16S)
Contact Retention (Size 60/100/8)
Shell Material
Shell Plating
Insulator and Gromet Material
Contact Material
Harnessing Info: Contact Cross-Section
Harnessing Info: Insulator Diameter
Specifications and dimensions subject to change.
Page 1 of 2
Datasheet for part number MS3102E20-22P
Our Catalog Part Number: MS3102E2022P
Our Global Manufacturing Part Number: 024253-0055
Brand: Cannon Product Category: Circular Product Line: MIL-DTL 5015 Series I Series: MIL-C-5015
Product Datasheet
Wire Stripping
(Size 15/15S/16/16S)
Wire Stripping (Size 60/100/8)
General Info
6,2 mm
11,8 mm
All tests in accordance with VG95319 and/or if
applicable with VG95210
Specifications and dimensions subject to change.
Page 2 of 2