*1. Through-beam Sensors are normally sold in sets that include both the Emitter and Receiver.
*2. The Reflector is sold separately. Select the Reflector model most suited to the application.
*3. Set the distance between the Sensor and the Reflector so that it is at least the value in parentheses.
3
E3ZM-C
Accessories
Sensor I/O Connectors (Sockets on One Cable End)
(Models with Pre-wired Connectors: A Connector is not provided with the Sensor. Be sure to order a Connector separately.)
(Refer to
Dimensions
on XS5.)
Size
Cable specifications
Fire-retardant,
robot cable
Appearance
2m
5m
Straight
Cable
Model
XS5F-D421-D80-F
XS5F-D421-G80-F
4-wire
XS5F-D421-D80-P
XS5F-D421-G80-P
M12
(For -M1TJ models)
Oil-resistant cable
(polyurethane)
2m
5m
Note 1. When using a Through-beam Sensor, order one Connector for the Receiver and one for the Emitter.
2. Ask your OMRON representative about connectors with other specifications.
Mounting Brackets
A Mounting Bracket is not provided with the Sensor. Order a Mounting Bracket separately if required.
(Refer to
Dimensions
on E39-L/E39-S/E39-R.)
Appearance
Model
Quantity
Remarks
Appearance
Model
Quantity
Remarks
E39-L153
(SUS304)
1
Mounting Brackets
E39-L98
(SUS304)
1
Metal Protective Cover
Bracket
*
E39-L104
(SUS304)
1
E39-L150
(SUS304)
1 set
(Sensor adjuster)
Easily mounted to the
aluminum frame rails of
conveyors and easily
adjusted.
For vertical angle
adjustment
E39-L43
(SUS304)
1
Horizontal Mounting
Bracket
*
E39-L151
(SUS304)
1 set
E39-L142
(SUS304)
1
Horizontal Protective
Cover Bracket
*
E39-L44
(SUS304)
1
Rear Mounting Bracket
E39-L144
(SUS304)
1
Compact Protective
Cover Bracket
*
Note: When using a Through-beam Sensor, order one Mounting Bracket for the Receiver and one for the Emitter.
*Cannot be used for Standard Connector models.
Reflector
(A Reflector is required for each Retro-reflective Sensor: A Reflector is not provided with the Sensor. Be sure to order a Reflector.)
(Refer to
Dimensions
on E39-L/E39-S/E39-R.)
Name
Reflector
Small Reflector
E3ZM-CR
sensing distance
*
Rated value
Reference value
---
3 m (100 mm)
---
4 m (100 mm)
---
5 m (100 mm)
---
2.5 m (100 mm)
---
3.5 m (100 mm)
---
1.5 m (50 mm)
Model
E39-R1
E39-R1S
E39-R2
E39-R9
E39-R10
E39-R3
Quantity
1
1
1
1
1
1
Remarks
· Reflectors are not provided with
Retroreflective models.
· The MSR function is enabled.
Note: If you use the Reflector at any distance other than the rated distance, make sure that the stability indicator lights properly when you install the Sensor.
*Set the distance between the Sensor and the Reflector so that it is at least the value in parentheses.
4
E3ZM-C
Ratings and Specifications
Sensing method
Model
Item
Sensing distance
Spot diameter
Standard sensing object
Differential travel
Reflectivity characteristic (black/white
error)
Directional angle
Light source (wavelength)
Power supply voltage
Current consumption
Control output
Emitter, Receiver: 3° to 15°
(Distance between emitter and receiver. Rated
sensing distance)
Infrared LED (870 nm)
Orange LED (615 nm)
Opaque: 12-mm dia. min.
---
---
Sensor: 3° to 10°
Reflector: 30° (Distance
to Reflector. Rated
sensing distance)
Red LED (660 nm)
NPN output
PNP output
Through-beam
E3ZM-CT61 (-M1TJ)
E3ZM-CT81 (-M1TJ)
15 m
E3ZM-CT62B (-M1TJ)
E3ZM-CT82B (-M1TJ)
20 m
Retro-reflective with
MSR function
E3ZM-CR61 (-M1TJ)
E3ZM-CR81 (-M1TJ)
4 m [100 mm]
*1
(Using E39-R1S)
3 m [100 mm]
*1
(Using E39-R1)
---
Opaque: 75-mm dia. min.
---
20% of sensing distance max.
Diffuse-reflective
E3ZM-CD62 (-M1TJ)
E3ZM-CD82 (-M1TJ)
1m
(White paper 300
×
300 mm)
---
Infrared LED (860 nm)
10 to 30 VDC, including 10% ripple (p-p)
40 mA (Emitter 20 mA max., Receiver 20 mA max.) 25 mA max.
Load power supply voltage: 30 VDC max., Load current: 100 mA max. (Residual voltage: 2 V max.)
Open-collector output (NPN/PNP output depending on model)
Netizens said they missed the fresh air outside, and missed the hot pot, pizza, hamburgers, French fries, spicy hot pot, grilled cold noodles, boiled fish, pickled fish, grilled fish, lamb skewers, ba...
The open source DAPLink has been upgraded to version 0253. Version 0253 fixes the bug of reset interruption after downloading. [url=https://github.com/ARMmbed/DAPLink/releases]Project website[/url]...
Panelization refers to having the manufacturer directly assemble small PCB boards into a whole piece.1. Why do we need to plywood? In other words, what are the benefits of plywood?1. In order to meet ...
Participate in the Microchip Quiz Event to decipher the unique features of Microchip's new microcontrollers and have a chance to win rich gifts!!!Core independent peripherals (CIP) technology is now a...
1. When compiling the program with CCS, the following error is reported:
DescriptionResourcePathLocationType
make: *** missing separator.Stop.main.d/G2553_MPU6050/Debugline 19C/C++ ProblemThere is onl...
Talking
京公网安备 11010802033920号
EEWORLD
