UHF RFID Inlays
AD-229r6
Dimensions
Operating Frequency
RF Protocol
Chip
EPC Memory
TID Memory
95 x 7.88 mm
Global (860 – 960 MHz)
ISO-18000-6C, EPC Class 1, Gen 2
Impinj Monza R6
96 bit
96 bits with 48 bit unique serial number
Common Applications
Supply Chain, Inventory and Logistics
Apparel and other item-level retail
Toll free US 866-903- RFID (7343) / rfid.info@averydennison.com
International +1-770-965-0807
PART NUMBER
Format
Antenna dimensions
(CDxMD)
Die-cut dimensions
Inlay substrate material
Inlay-to-liner adhesive
Liner material
Face Sheet
Standard pitch
Standard web width
Total thickness over chip
Operating temperature
RoHS
Quality assurance
Un-wind direction
Core size with adaptor insert
Maximum roll outer diameter
(not to exceed)
Average # of units per roll
Rev
RF600591
Dry Inlay – Wide Web
3.74 x 0.31 in
(95 x 7.88 mm)
N/A
White PET
N/A
N/A
N/A
0.625 in (15.875 mm)
4.75 in (120.65 mm)
9-11 mils (230-290
microns)
-40 to 185F (-40 to 85C)
EU Directive 2011/65/EU
Compliant
100% read tested with-
of-tolerance inlay marked
Inlay-side Out
6 in (152.4 mm)
13 in (330.2 mm)
20,000 good +/- 10%
00
RF600592
Dry Inlay
3.74 x 0.31 in
(95 x 7.88 mm)
N/A
White PET
N/A
N/A
N/A
0.625 in (15.875 mm)
3.875 in (98.425 mm)
9-11 mils (230-290
microns)
-40 to 185F (-40 to 85C)
EU Directive 2011/65/EU
Compliant
100% read tested with-of-
tolerance inlay marked
Inlay-side Out
6 in (152.4 mm)
17 in (431.8 mm)
20,000 good +/- 10%
RF600593
Wet Inlay
3.74 x 0.31 in
(95 x 7.88 mm)
3.885 x 0.4 in
(98.6 x 10.16 mm)
White PET
S-490 (FASSON)
40# SCK
N/A
0.625 in (15.875 mm)
4.125 (104.77 mm)
9 -12 mils (220-300
microns)
-40 to 185F (-40 to 85C)
EU Directive 2011/65/EU
Compliant
100% read tested with-of-
tolerance inlay marked
PS Inlay-side Out
3 in (76.2mm)
13 in (330.2mm)
20,000 good
00
Care and handling:
RFID inlays are sensitive to ESD. Observe standard practices to keep environmental static charge to a
minimum.
Applications:
This product should be tested by the customer/ user thoroughly under end use conditions to ensure
the product meets the particular requirements. Avery Dennison does not represent that this product is fit for any
particular purpose or use.
Warranty:
Please refer to Avery Dennison RFID standard terms and conditions. The information contained herein
is believed to be reliable but Avery Dennison makes no representation concerning the accuracy or correctness of
the data.
Product changes:
Avery Dennison reserves the right to modify, change, supplement or discontinue
product offerings at any time without notice.
Trademark statement:
Avery Dennison, S490 and Fasson are trademarks of Avery Dennison Corporation.
For the most recent information on Avery Dennison products, visit www.rfid.averydennison.com.
© 2015 Avery Dennison Corp. All rights reserved. 170 Monarch Lane, Miamisburg, OH 45342, USA
Domestic Chip Exchange
京公网安备 11010802033920号
EEWORLD
