ADVANCED ENGINEERING
Technical Data Sheet
G E NE R A L P UR P OS E
Tec hn ic a l Da ta S h e e t
Put-Ups
Economical And Easy
To Install
Resists Gasoline,
Engine Chemicals
And Cleaning Solvents
Expands Up To 150%
Cut And Abrasion
Resistant
FMVSS 302 Approval
Nominal
Size
Part
#
Expansion Range
Min
3/64"
3/32”
1/8”
3/16”
1/4”
3/8”
1/2”
5/8”
3/4”
1”
1 1/4”
1 1/2”
1 3/4”
2 1/2”
1/8”
4”
1/2”
3/4”
Max
3/32"
1/4”
7/16”
1/2”
3/4”
1”
1 1/4”
1 5/8”
1 3/4”
2 1/8”
2 3/4”
3 1/2”
3 5/8”
4 3/4”
3/8”
6 1/2”
1 1/4”
1 3/4”
Bulk
Spool
1,000'
1,000’
1,000’
500’
500’
500’
250’
250’
250’
200’
200’
200’
200’
100’
1,000’
100’
250’
250’
Shop
Spool
250'
225’
200’
125’
100’
100’
75’
65’
50’
40’
30’
50’
50’
50’
200’
50’
75’
50’
Available
Colors
Lbs/
100’
0.22
0.20
0.30
0.57
0.77
0.95
1.20
1.34
1.60
1.96
2.45
2.60
3.80
4.00
0.39
3.80
1.04
1.19
1/16"
PTN0.06
1/8”
PTN0.13
1/4”
PTN0.25
3/8”
PTN0.38
1/2”
PTN0.50
5/8”
PTN0.63
3/4”
PTN0.75
1”
PTN1.00
1 1/4”
PTN1.25
PTN1.50
1 1/2”
1 3/4”
PTN1.75
2”
PTN2.00
2 1/2”
PTN2.50
3”
PTN3.00
3 END CONSTRUCTION
1/4”
PT30.25
9 MIL CONSTRUCTION
4”
PT94.00BK
PET LEAN
3/4”
PTL0.75BK
1 1/4”
PTL1.25BK
more
than
30
BK,CL,NB,RE
4
BK
BK
BK
A Versatile Bundling
And Protection Solution
Cut Cleanly
Hot Knife
See color chart
Colors
Available:
Material
Polyethylene Terepthalate
Grade
PTN
Monofilament Diameter
.010”
Drawing Number
TF001PET-WD
The FLEXO® Original braided from 10 mil
polyethylene terepthalate (PET)
monofilament yarns. The material has a wide
operating temperature range, is resistant
to chemical degradation, UV radiation, and
abrasion. Used in electronics, automotive,
marine and industrial wire harnessing applications
where cost efficiency and durability are critical.
The unique braided construction and wide
expandability allows quick and easy installation
over large connectors and long runs.
High thermal and chemical resistance and wide
color/size selection make FLEXO® Original PET
ideal for customizing and protecting the wires,
hoses and cables in custom and classic colors.
800.323.5140 • 973.300.9242 • fax: 973.300.9409
104 Demarest Road • Sparta, NJ 07871
www.techflex.com
FAR-25
G E NE RAL P UR POS E
ADVANCED ENGINEERING
Te c h n i cal Data Sheet
Technical Data Sheet
Melt Point
ABRASION
Abrasion Resistance
FLAMMABILITY
Rating______________UL94VO, FAR25,
FMVSS-302
482°F (250°C)
Maximum Continuous
257°F (125°C)
Minimum Continuous
-94°F (-70°C)
Mil-I-23053
www.techflex.com
ASTM D-2117
Medium
Abrasion Test Machine
Taber 5150
Abrasion Test Wheel
Calibrase H-18
500g
77°F
72%
Abrasion Test Load
Room Temperature
Humidity
Two Broken Filament
CHEMICAL
RESISTANCE
1=No Effect
2=Little Effect
3=Affected
4=More Affected
5=Severely Affected
PHYSICAL
PROPERTIES
Monofilament Diameter_________.010
ASTM D-204
Flammability Rating___________UL94
FMVSS-302 Approved
Recommended Cutting_____Hot Knife
Colors________________________<30
Wall Thickness_________________.025
Tensile Strength (Yarn)____________7.5
ASTM D-2256 Lbs
Specific Gravity ASTM D-792______1.38
Moisture Absorption____________.1-.2
% ASTM D-570
Hard Vacuum Data_________________
ASTM E-595 at 10-5 torr
TML___________________________.19
CVCM_________________________.00
WVR__________________________.16
Smoke D-Max___________________56
ASTM E-662
Outgassing___________________Med
Oxygen Index___________________21
ASTM D-2863
300 Test Cycles
Approximately 6 Broken
Filaments
500 Test Cycles
Material Destroyed
- Very Visible Hole In
Material
1,150 Test Cycles
Pre-Test Weight
4,547.4 mg
4,133.9 mg
413.5 mg
Post-Test Weight
Test End Loss Of Mass
Point Of Destruction
Aromatic Solvents ________________ 2
Aliphatic Solvents _________________ 1
Chlorinated Solvents ______________ 3
Weak Bases ______________________ 1
Salts ____________________________ 1
Strong Bases______________________2
Salt Water
0-S-1926
________________ 1
Hydraulic Fluid
MIL-H-5606
_________ 1
Lube Oil
MIL-L-7808
_______________ 1
De-Icing Fluid
MIL-A-8243
__________ 1
Strong Acids _____________________ 3
Strong Oxidants __________________ 2
Esters/Keytones __________________ 1
UV Light ________________________ 1
Petroleum _______________________ 1
Fungus
ASTM G-21
________________ 1
Halogen Free ___________________Yes
RoHS __________________________Yes
SVHC ________________________ None
© 2015 Techflex, Inc. - Any unauthorized reproduction, in whole or part, in any medium whatsoever, without the express written permission of Techflex, Inc. is strictly forbidden.
Techflex product names and logos are registered trademarks of Techflex, Inc., unless otherwise attributed. The contents and illustrations contained herein are believed to be reliable.
Techflex makes no warranties as to their accuracy or completeness and disclaims any liability in connection with their use. Techflex’s only obligations are those in standard terms of
sale for these products and Techflex will not be liable for any consequential or other damages arising due to misuse of these products or typographical errors or omissions.
11-15
Users should make their own evaluation to determine the suitability of these products for their unique and specific applications.