Flashers and Tower Lighting Controls
Flashers
FS200 SERIES
Description
The FS200 Series may be used to control inductive,
incandescent, or resistive loads. Factory fixed flash rate of 45
or 90 FPM or may be ordered with a fixed custom flash rate
ranging from 10 to 180 FPM. Encapsulation provides protection
against shock, vibration, and humidity. Uniform performance,
high inrush current capability, and low RFI, make this series ideal
for general industrial applications.
Operation
Upon application of input voltage, the T2 OFF time begins. At
the end of the OFF time, the T1 ON time begins and the load
energizes. At the end of T1, T2 begins and the load de-energizes.
This cycle repeats until input voltage is removed.
Reset:
Removing input voltage resets the output and the
sequence to T2.
Features & Benefits
Wiring Diagram
FEATURES
3A steady, 30A inrush,
SPST output contact
Totally solid state
and encapsulated
V = Voltage
L = Load
BENEFITS
Provides direct control of inductive, incandescent, or
resistive loads
No moving parts to arc and wear out over time and
encapsulated to protect against shock, vibration,
and humidity
Ideal for general industrial applications
High inrush current
capability and low RFI
Accessories
P1023-6 Mounting bracket
The 90° orientation of mounting slots makes
installation/removal of modules quick and easy.
P1015-64
(AWG 14/16)
Female Quick Connect
These 0.25 in. (6.35 mm) female terminals are
constructed with an insulator barrel to provide
strain relief.
Ordering Information
MODEL
INPUT
RATING
FLASH RATE
FS219-45
FS224
12VDC ± 20%
24VDC ± 20%
3A
3A
45 FPM
90 FPM
P1015-18 Quick Connect to Screw Adapter
Screw adapter terminal designed for use with
all modules with 0.25 in. (6.35 mm) male quick
connect terminals.
C103PM (AL) DIN Rail
35 mm aluminum DIN rail available in a 36 in.
(91.4 cm) length.
P1023-20 DIN Rail Adapter
Allows module to be mounted on a 35 mm DIN
type rail with two #10 screws.
If you don’t find the part you need, call us for a custom product 800-843-8848
Specifications
© 2016 Littelfuse Protection Relays & Controls
www.littelfuse.com/fs200
Rev: 1-A-062316
Flashers and Tower Lighting Controls
Flashers
FS200 SERIES
Specifications
Technical Data
Operation
Flash Rate
Custom Flash Rate
ON/OFF Ratio
Input
Voltage
Output
Load Type
Maximum Load Rating
OFF State Leakage Current
12 & 24VDC
Inrush
Mechanical
Mounting
Dimensions
Termination
Protection
Circuitry
Environmental
Operating/Storage
Temperature
Weight
OFF/ON solid-state flasher (continuous duty)
Fixed at 90 FPM ±10%
10 - 180 FPM
≅
50%
12, 24, 36, 48, or 110VDC
Inductive, resistive, or incandescent
0.25 - 3A steady state
≤ 250 µA
10 times steady state current
Surface mount with one #10 (M5 x 0.8) screw
H
50.8 mm (2”);
W
50.8 mm (2”);
D
30.7 mm (1.21”)
0.25 in. (6.35 mm) male quick connect terminals
Encapsulated
Flasher Function Diagram
FLASHER (OFF FIRST)
V = Voltage
R = Reset
L = Load
T1 = ON Time
T2 = OFF Time
T1
≅
T2
-20° to 60°C / -40° to 85°C
≅
2.2 oz (62 g)
© 2016 Littelfuse Protection Relays & Controls
www.littelfuse.com/fs200
Rev: 1-A-062316
京公网安备 11010802033920号
EEWORLD
