JJF SERIES
–
DETECTOR SWITCHES
Telecommunications
RoHS Compliant
White goods
Instrumentation
Automotive
Applications
JJ Series
–
Detector Switches
Benefits
Compact Size
Sharp detection
feeling
Halogen and Lead
Free
TE Connectivity is pleased to introduce its JJ Series of Detector Switches, suitable
for a wide variety of applications given their several presentations ranging from
horizontal or vertical actuated options as well as Gull-winged, J-leaded and
Through-Hole mounting possibilities.
The Detector Switches will be offered in a wide range of sizes giving the possibility
for countless applications going from automotive to telecommunications.
JJ Series
–
Family Classification
Series
JJA
JJB
JJC
JJD
JJE
JJF
JJG
JJH
JJI
JJJ
JJK
JJL
JJM
JJN
JJO
JJP
Body Size
3.5x2.8 mm
3.5x2.98 mm
3.5x3.3 mm
4.2x3.6 mm
4.7x3.5 mm
4.7x3.8 mm
5.7x4.0 mm (High-Rating)
5.7x4.0 mm (Standard-Rating)
5.0x4.4 mm
6.0x4.85 mm / 5.5x4.7 mm
6.3x3.0 mm
6.5x3.9 mm
5.7x4.0 mm
5.7x4.0 mm (Wedge)
10.0x3.8 mm
10.6x10.0 mm
2331364-1 Rev A
06/2018
Dimensions in
millimetres unless
otherwise specified
Dimensions Shown for
reference purposes only.
Specifications subject to
change
For Email, phone or
live chat, go to:
www.te.com/help
JJF SERIES
–
DETECTOR SWITCHES
1. Style
Detector “witches are
mainly used as signal switches of electric devices, with the general
requirements of mechanical and electrical characteristic.
1.1 Operating Temperature Range: -10℃
to
60℃
1.2 Storage Temperature Range: -20℃ to 70℃
1.3 The shelf life of product is within 6 months.
2. Current Range:
1mA, 5 VDC
3. Type of Actuation:
Tactile feedback
4. Test Sequence:
Item
Description
Test Conditions
Requirements
There shall be no defects
that affect the
serviceability of the
product.
Appearance
1
Visual
Examination
Physical inspection without
applying any external forces.
2
Contact
Resistance
Actuate the switch 4.35mm
(5.30mm Stem); 2.85mm (3.80mm Stem)
and measure contact resistance using a
micro-Ohmmeter.
1Ω Max.
3
Electric
Performance
Insulation
Resistance
Measurements shall be made at 100 VDC
potential between terminals and cover.
MΩ
Min.
4
Dielectric
Withstanding
Voltage
100 VAC (50Hz or 60Hz) shall be applied
across terminals and cover for 1 minute
There shall be no
breakdown or flashover
5
6
Capacitance
Operating Force
Capacitance shall be measured at 1 MHz
between terminals.
As the specification shows operating
force is measured
5 pF Max.
40gF Max
.4N Max
2331364-1 Rev A
06/2018
Dimensions in
millimetres unless
otherwise specified
Dimensions Shown for
reference purposes only.
Specifications subject to
change
For Email, phone or
live chat, go to:
www.te.com/help
JJF SERIES
–
DETECTOR SWITCHES
7
Contact (On)
point
--------------------------
As the specification shows ON
start position
8
Stop
Strength
Apply vertical static load of
1KgF(9.8N) shall be applied in the
direction of stem operation for a
period of 60 seconds
As shown in items 2 through 7.
(See chart below)
Solder Heat
Resistance
ON starting before reflow:
5.30mm Stem
+0.2
5.00
3.80mm Stem
+0.2
3.50
-0.3
9
Mechanical
Performance
-0.3
1) Shall be free from
pronounced backlash and
falling-off or breakage
terminals
2) As shown in items 2 through
8.
10
Vibration
Test per Method 201A of MIL-STD-
202F
1) Swing distance=1.5mm
2) Frequency: 10-55-10Hz in 1-
min/cycle.
3) Direction: 3 vertical directions
including the directions of operation
4)Test time: 2 hours each direction
Test per Method 213B condition A of
MIL-STD-202F
1) Acceleration; 50G
2) Action time: 11±1m seconds
3) Testing Direction: 6 sides
4) Test Cycle: 3 times in each
direction
1) Temperature: 245±3℃
Lead-Free solder: M705E JIS Z 3282 A
(Tin 96.5%, Silver 3%, Copper 0.5%)
2) Flux: 5-10 sec.
3) Duration of solder
Immersion: 3±0.5sec.
Measurements shall be made
following the test forth below:
1) 1mA,5 VDC resistive load
2) Apply a static load in the direction
of operation equal to the operating
force to the center of the stem.
3) Rate of Operation: 20 to 25
operations per minute.
4) Cycle of Operation: 100,000 cycles
Min.
As shown in items 2 through 8.
11
Shock
As shown in items 2 through 8.
12
Solderability
No anti-soldering and the
coverage of dipping into
solder must more than 75%
was requested.
Durability
13
Operating
Life
1) As shown in items 4 to 5
2) Insulation Resistance:
MΩ
Min.
3) Contact Resistance: 2Ω
Max.
2331364-1 Rev A
06/2018
Dimensions in
millimetres unless
otherwise specified
Dimensions Shown for
reference purposes only.
Specifications subject to
change
For Email, phone or
live chat, go to:
www.te.com/help