AM10EW-C Series
10 watt dc-dc converters
•
•
•
POWER MODULES FOR PCB MOUNTING
4:1 WIDE INPUT RANGE
REGULATED OUTPUT
•
•
LOW RIPPLE & NOISE
REMOTE ON/OFF CONTROL ( OPTIONAL)
DC-DC CONVERTERS
GENERAL DESCRIPTION
Our AM10EW-C series is a family of cost effective 10W single
output DC-DC converters. These converters are shielded on all
six sides and encapsulated with a nickel-coated copper with a
non-conductive base and dimensions of 50.8x25.4x10.5mm. The
high performance features of our AM10EW-C components
include short circuit protection with current limit auto recovery,
tight line regulation and a high efficiency operation coefficient up
to 83%. These wide range devices operate over 4:1 input voltage
range, providing a continuously stable output voltage.
Ten models operate from an input voltage range of 24 &
48VDC producing output voltages of 3,3, 5, 12, 15 &
24VDC. The normal operation is specified over the full
operating temperature range of -25°C to +71°C with no
derating required. Cooling is done by free air convection.
ELECTRICAL SPECIFICATIONS
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
Input Specifications:
Voltage range
Filter
Isolation Specifications:
Rated voltage
Resistance
Capacitance
General Specifications:
Efficiency
Switching frequency
Output Specifications:
Voltage accuracy
Ripple
Noise
Short circuit protection
Over current protection
24VDC, 9~36VDC
48 VDC, 18~75VDC
p
(Pi) Network
1500VDC
>1000 Mohms
1000pF
78% to 83%
300KHz, typ. 100% load
±2%, max.
<0.2% Vout +20mVmax (Vp-p)
<0.5% Vout +50mVmax (Vp-p)
Current limit, auto-recovery
Works over 120% of rating
and recovers automatically
Over voltage protection Zener diode clamp protection
Line regulation (HL-LL) ±0.5%, typ.
Load regulation (10-100%) ±1%, typ.
Temperature coefficient ±0.02%/°C, typ.
Physical Specifications:
Dimensions
50.8x25.4x10.5mm
2.0x1.0x0.413inches
Weight
32g
Case material
Nickel-Coated Copper with
Non-Conductive base,
six sides’ shielded
Environmental Specifications:
Operating temperature
-25°C …+71°C
Storage temperature
-55°C …+105°C
Case temperature
+95°C, max.
Humidity (non-condensing)
Up to 95%
Cooling
Free-air convection
Specifications are subject to change without notification
MTBF: > 800,000 hrs (MIL-HDBK-217F, Ground Benign, t=+25ºC)
76
Continued on next page
TO ORDER CALL 1-888-9-AIMTEC
AM10EW-C Series
OUTLINE DIMENSIONS
& PIN CONNECTIONS
MECHANICAL DIMENSION (Top View)
Pin
1
2
3
4
5
6
Single
On/Off Control (Optional)
-V Input
+V Input
-V Output
No pin
+V Output
DERATING
BLOCK DIAGRAM
Single Output
MODELS
Single output
Models
AM10EW-2403SC
AM10EW-2405SC
AM10EW-2412SC
AM10EW-2415SC
AM10EW-2424SC
AM10EW-4803SC
AM10EW-4805SC
AM10EW-4812SC
AM10EW-4815SC
AM10EW-4824SC
Input Voltage
Ouput Voltage
3.3VDC
5VDC
12VDC
15VDC
24VDC
3.3VDC
5VDC
12VDC
15VDC
24VDC
Ouput Current max.
2000mA
2000mA
830mA
670mA
420mA
2000mA
2000mA
830mA
670mA
420mA
9VDC-36VDC
18VDC-75VDC
77
VISIT US AT WWW.AIMTEC.CA
京公网安备 11010802033920号
EEWORLD
