Capacitors for Power Factor Correction
PhiCap; Metallized Polypropylene Film Capacitor; 3-Phase
Preliminary data
Features
Dieletric
Resin filling
Safety device
Case
Mounting and grounding
Cooling
Degree of protection
Terminals
B32343 / B32344
Polypropylene film
Non-PCB, soft polyurethane
Overpressure disconnector, self-healing technology
Extruded round aluminum can with stud
Threaded M8 (Ø 53 mm) / M12 stud on bottom of can
Naturally air-cooled (or forced air cooling)
Indoor mounting (optionally with cap for IP32)
Series B32343 – 6.3 mm fast-on terminals
Series B32344 – Sigut terminal
Three-phase delta-connected and provided with discharge resistors
Characteristics
Rated capacitance C
N
and Q
N
Tolerance
Rated voltage U
N
Rated frequency f
R
Maximum ratings
Maximum permissible voltage U
max
Maximum permissible current I
max
Maximum transient inrush current
Power dissipation
Test data
AC test voltage terminal-to-terminal
Insulation voltage between terminals and
container
Dissipation factor tanδ at 50 Hz
Climatic category –25/D
Lower category temperature T
min
Upper category temperature T
max
Maximum permissible humidity
Maximum permissible altitude
Life expectancy
Reference standards IEC 831 – 1 / 2 and IS:2834
According to specification table
-5% / +10%
According to specification table
50 and 60 Hz
1.1 x U
N
for a maximum of 8 h daily
1.2 x U
N
(up to 5 min) and 1.3 x U
N
(up to 1 min)
1.5 x I
N
200 x I
N
≤
0.35 W / kVAr
2.15 x U
N
, 2s
3000 Vac, 10s
≤
6.0 x 10
-4
-25°C
+55°C
95%
4000 m above sea level
> 100,000 operating hours
FK PM PFC
Page 1 of 7
24. Feb. 2003
京公网安备 11010802033920号
EEWORLD
