10119128-10C-70DLF

Omni Transmission Systems is a family-owned company with a 60-year history of providing fluid, mechanical and electrical transmission systems. Headquartered in Houston, Texas, USA, it pr...[Details]

Before the introduction of UART, since there was no OS, after we wrote the program and burned it into the development board for execution, we could not print some prompt information during the program...[Details]

When it comes to end-to-end competition, the gap between car companies in the field of intelligent driving has clearly widened. There are many influencing factors, and data volume and computing pow...[Details]

NXP recently officially opened its fab in Arizona to produce GaN devices for power amplifiers, which can span 5G frequencies from Sub-6GHz to millimeter waves. 5G base stations need to transmit low...[Details]

　　Electronics amateurs often use batteries. There are many types of batteries with very different characteristics. In particular, the batteries need to be paired when they are connected in series. In...[Details]

The frequency offset measurement method developed in the vector network analyzer can effectively solve the problem of reciprocity difficulties and the need for mixer/converter consistency testing. It...[Details]

Windows CE inherits the rich features of the desktop version of Windows to the greatest extent, but Windows CE is not a universal installation version of the operating system. In the world of embedde...[Details]

Since its conception in the 1970s, digital signal processing (DSP) has become a familiar technology, driven by the explosion of media applications, especially in the past decade. Starting with voic...[Details]

In addition to performance, reliability, low power consumption, and cost, wireless ECG monitors must support dedicated telemetry frequency bands so that ECG data from the monitor can be quickly, ac...[Details]

One of the most promising areas in the semiconductor industry today is the development of LED lighting management systems, such as LED chips and light-emitting devices that use LED power to drive t...[Details]

Design requirements: In this project, you will design a basic circuit for a microcontroller, which includes a crystal oscillator, etc. Connect a small LED to any I/O pin of the microcontroller and ...[Details]

Electronic packaging is the tube shell used to install the built-in chip of the integrated circuit. It plays the role of placing, fixing and sealing, protecting the built-in chip of the integr...[Details]

If sensors are not connected to the smart home to control the lights in each room, people often forget to turn off the lights. If human body sensors can be installed, ideally the lights can be turned...[Details]

Set the resistance bar to ×1kω (or ×100ω). Use two test leads to touch the two electrodes of the device under test. Observe the reaction of the meter needle and determine the quality status according...[Details]

Self-protection device R25 with 1.5 kΩ resistance, can handle voltages up to 1200 VDC, has an energy absorption capacity of 340 J, and reduces component count MALVERN, Pennsylvania, ...[Details]