Step 1: Calibration.In addition to the cable to be tested, another auxiliary cable is also required. The ZVB8 vector network analyzer (hereinafter referred to as VNA) we use has two ports: Port1 and P...
[align=left][color=rgb(51, 51, 51)]During the circuit design process, applications engineers often overlook the layout of the printed circuit board (PCB). The problem often encountered is that the cir...
Debug Log 2
Using Hardware SPI
The speed of the simulated SPI last time was a bit impressive, this time I use hardware SPI
csi_gpio_pin_t pin_clk;
csi_gpio_pin_t pin_mosi;
csi_gpio_pin_t pin_cs;
csi_g...
From October 28 to 30, 2021 , at the Shenzhen World ExhibitionConvention Center (Bao'an New Hall) , the member exhibition of the 2021 South China International Intelligent Manufacturing, Advanced Elec...
Motion detection is an important part of security system and PIR sensor is one of the most commonly used sensors to trigger alarm when motion is detected. This sensor can easily detect the motion of p...
A while ago, I happened to see the registration for the Digi-Key Innovation Design Competition, and I took part in it with the mentality of giving it a try. Fortunately, I was selected in the first ba...