When you touch the surface of the power module, it feels hot. Is the module broken? Wait a minute, it is a little hot just because it is working hard. But high temperature has a great impact on the re...
If you want to restore the factory firmware after developing SensorTile.box yourself or burning other programs for testing, you can use DFU or JTAG to flash STSW-MKSBOX1_BL firmware
Then use STBLESens...
littleshrimpST Sensors & Low Power Wireless Technology Forum
# esp32 s2 LED, button driver > ESP32-S2-Kaluga-1 development board LED, button driver. ##led driver - Hardware uses GPIO45 to control a WS2812 lamp beadRefer to the official routine for controlling W...
For example, the AT070TN92 LCD data sheet says: "backlight 14-leds". Does the "LCD" here refer to the number of LEDs? How are these LCDs connected? Some are marked: 3 in series 6 or other indicators. ...
I saw the nRF24L01 driver in the micropython source code a long time ago, but I never tested it. Yesterday I soldered two modules, modified the GPIO definition, tested the basic communication function...
Take MSP430Fr6972 as an example:1) Enter the TI official website: http://www.ti.com.cn/2) Enter: msp430fr6972 in the search bar and click go on3) Click the first search result (usually the first one i...