A: Please tell me which GPIO the SNVS_TAMPER3 signal on the IMX6UL corresponds to and which document should I look at? The GPIO is not marked in the core board interface diagram.
B: WIKI search
http:/...
I have a project that I did on GD32F450, similar to ST's F427, using the freertos+HAL library generated by CUBE. There are two main tasks. The Main task is to use the signal converted from AC power as...
According to "Adding Flash Read and Write to an Existing mmWave Project", the code snippet is as follows:
/* Setup the PINMUX to bring out the QSPI */
Pinmux_Set_OverrideCtrl(SOC_XWR14XX_PINR10_PADAP,...
I am a newbie and I really don't know much about this. Could you please recommend a chip that can boost 3.3V to 5V, preferably one with higher efficiency?...