Automatic reset thermostat designed to meet your specific application requirements. Its patented and tamper proof snap action bi-metal disc provides reliable and
repeatable switch actuation. The 3NT is suitable for electrical loads ranging from dry circuits to 10A @ 240 VAC.
The core of the 3NT is the proven 1NT thermostat. Recognized by UL/CSA and KEMA/ENEC agencies, hundreds of millions of the 1NT device are in the field today used
in a variety of HVAC, appliance, automotive and specialty applications.
Manufactured at ISO 9001 certified manufacturing sites, its dry seal allows direct integration of the thermostat into a wire harness eliminating the need for extra
connections.
Features
• Automatic reset
• Small and easy to mount
• Fast thermal response
• Innovative dry seal design - protects from moisture and dust
• Reliable 100K cycle life
• High temperature - to 275ºF (135ºC)
Applications
• HVAC
• Commercial
• Dehumidifiers
• Freezers
• Heat pumps
• Ice makers
• Refrigerators
• Condensing or moist environments
SPECIFICATIONS
Agency
UL
(USA, Canada)
Cycles
x1000
100
100
30
30
100
30
Volts
120 Vac
240 Vac
120 Vac
240 Vac
30 Vdc
240 Vac
FLA
5.8
2.9
10.0
10.0
LRA
34.8
17.4
40.0
40.0
Amps
(resistive)
10
10
1
16
VA
125
125
Electrical Ratings
ENEC (Europe)
Operating Temperature
Ambient Temperature
Temperature rating
Minimum Nominal Temperature
Differential
Dielectric Strength
Standard Wire Leads
-20 to 135ºC (-4 to 275ºF)
-40ºC to maximum wire lead insulation
PVC - 105ºC
XLP - 125ºC
(Allow 15ºC de-rating below wire insulation rating at maximum 10A current)
8ºC (15ºF)
750 Vrms
1500 Vrms terminals to case
18 AWG (1/32” or 1/16” wall thickness in either 105°C PVC or 125°C XLPE)
Hi everyone! My name is Ethan and I'm one of the 10 developers working on Peregrine. This post will go over some of the updates we've recently added to Peregrine.If you know Python, you know how easy ...
1. Install Linux source code dependency packagesIf you are using an Ubuntu16.04 virtual machine image with a compiled environment, the Linux source code dependency packages have already been installed...
I want to make a component with a grounding copper foil under the CPU, but I don't want to remove the solder mask all over, and there is green paint solder mask on some parts. Is there a way to design...
1. A brief introduction to CC1310
Features
The CC1310 device is a highly integrated, true single-chip solution that incorporates a complete RF system and an on-chip DC-DC converter. The device has exc...
A few years ago, some people questioned new energy electric vehicles with deeper issues such as whether coal-fired power generation causes greater environmental damage and how to deal with discarded l...
MicroPython Open Source section
京公网安备 11010802033920号
EEWORLD
