5853, RoHS-Compliant Commencing With 3/1/2005 Production
Note: all colors and put-ups
This document certifies that the Alpha part number cited above is manufactured in accordance with Directive 2011/65/EU of the European
Parliament, better known as the RoHS Directive (commonly known as RoHS 2), with regards to restrictions of the use of certain hazardous
substances used in the manufacture of electrical and electronic equipment. This certification extends to amending Directive 2015/863/EU which
expanded the list of restricted substances to 10 items (commonly known as RoHS 3) The reader is referred to these Directives for the specific
definitions and extents of the Directives. No Exemptions are required for RoHS Compliance on this item. Additionally, Alpha certifies that the listed
part number is in compliance with China RoHS “Marking for Control of Pollution by Electronic Information Products” standard SJ/T 11364-2014.
Substance
Lead
Mercury
Cadmium
Hexavalent Chromium
Polybrominated Biphenyls (PBB)
Polybrominated Diphenyl Ethers (PBDE) ,
Including Deca-BDE
Bis(2-ethylhexyl) phthalate (DEHP)
Butyl benzyl phthalate (BBP)
Dibutyl phthalate (DBP)
Diisobutyl phthalate (DIBP)
0.1% by weight (1000 ppm)
0.1% by weight (1000 ppm)
0.1% by weight (1000 ppm)
0.1% by weight (1000 ppm)
0.1% by weight (1000 ppm)
Maximum Control Value
0.1% by weight (1000 ppm)
0.1% by weight (1000 ppm)
0.01% by weight (100 ppm)
0.1% by weight (1000 ppm )
0.1% by weight (1000 ppm)
The information provided in this document and disclosure is correct to the best of Alpha Wire's knowledge, information and belief at the date of its
release. The information provided is designed only as a general guide for the safe handling, storage, and any other operation of the product itself or
the one that it will become part of. The intent of this document is not to be considered a warranty or quality specification. Regulatory information is
for guidance purposes only. Product users are responsible for determining the applicability of legislation and regulations based on their individual
The IO interface of the Xingkong board is at a 3.3V voltage level, and some of my own modules are not the same as the module interfaces of DF, so I designed an adapter board that can connect to the Xi...
In the teaching process, one party is the lecturer and the other party is the listener. We learn through the teacher's purposeful, planned and organized leadership to ensure that our knowledge is enri...
I would like to ask what kind of clock does timer 1 provide to the serial module in the 51 single-chip microcomputer serial communication mode 1? Is this clock generated by the overflow of timer 1? Wh...
As shown in the figure, we can see that the Ethernet interface differential signal is connected to resistors and capacitors, and the other end is grounded. In addition, every two resistors share a cap...
Live Topic: Continuous Rising, Firmware Upgrade Solution for Renesas MCU
Live broadcast time: November 9, 2022 (Wednesday) 10:00-11:30 am
Live broadcast content:
Software-defined products are a new di...