Interpreting the Foreigners' Rules of Experience for Microwave Circuits
Disclaimer:
The article to be interpreted comes from a foreign paper. Some of the individual interpretation points are quite int...
[i=s]This post was last edited by yhyworld on 2019-11-20 16:38[/i]See Figure 1,LM5118 specification, 8.2.1 Design Requirements, minimum load current (CCM operation) = 600mA.
Figure 2 is Figure 19 ment...
[i=s]This post was last edited by btty038 on 2018-11-30 13:37[/i] The above test effect diagram, with further + high voltage frequency,... [b][color=#5E7384]This content is originally created by EEWOR...
A: What medium is used to start the development board when the boot media selection pins are all low? The BT_CFG7 of the board we made is low, and BT_CFG6, 5, and 11 are all high, but the core board s...
[size=4] The McBSP interface of VC5509A can be configured in 4-wire SPI mode, so it can communicate directly with ADXL345. The DSP motherboard SDUST VC5509A V1.1 made in the laboratory is still used. ...