The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
2mm Hard Metric Connector
PCN21 Series
sFeatures
1. Variety of styles
IEC Styles: A (110 contacts, 5 row ), B (125 contacts, 5
row), C (55 contacts, 5 row ), D (176 contacts, 8 row), E
(200 contacts, 8 row) and M (5 row + 3 coaxial or power
Headers and receptacles with the compliant press-fit
terminations can be easily installed on PCB with readily
available tools.
3. High reliability socket contacts
Two-point contacts assure good electrical and
mechanical connection.
4. Ground connection
sApplications
Switchboards, transmission systems, Celluler base
stations, industrial computer boards, measuring
instruments, control equipment
Ground connection contact rows can be added (except
M Style).
5. 3-stage sequential contacts
Header can be supplied with different lengths of
contacts (mating side) to assure ground-signal-power
mating sequence.
6. Coding keys
Style A, D and M will accept coding keys to prevent
mating of incorrect connectors.
7. Different platings are available
Gold plating and tin plating are available for the
termination side. (Except 8 rows type)
8. Coding key
UL listed (File E52653)
Style A
Style B
Style C
Style D
Style E
Style M
Type AB
Compact PCI P2/J2, P3/J3 equivalent
2005.1
1
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
sPCN21
Series Seletion Chart
Standards
Item
Without ground
terminal
Style A
Style B
IEC 61076-4-101 compliant
Style C
Style D
Style E
P6
P7
P8
P9
P10
Header connector (Back Wiring Board side (BWB) male connector)
Note: …A: PCB leads gold plated (top ground plate is tin-lead or tin plated, bottom ground plate is tin-lead plated). B…PCB leads tin plated
Mid-plane (Shroud): Page 22 to 23, Coding key: Page 24, High power contact or coaxial connector: Page 25
2
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
sOrdering
information
Connector
PCN 2 1
*
-
*
P A
*
- 2 PF - G (01)
1
1
Series name
2
A···PCB leads
3
B···PCB leads
2
: PCN 21
: Gold plated
: Tin plated
3
4
5
6
7
8
9
10
6
Positioning post (Applicable to receptacle styles A and C only)
Blank : With
A
: Without
7
Contact pitch: 2 mm
8
Terminal length
PF : Press-fit short pin
W
: Press-fit long pin
9
Ground
Blank : Without ground terminal
G
: With ground terminal
10
Contact area gold plating thickness
Blank : 0.8
µm
(01)
: 0.2
µm
3
No. of contacts : 55, 95, 110, 125,176,200
4
Connector classification
P: Pin header
S: Receptacle
5
IEC type
A : IEC 61076-4-101 Style A
B : IEC 61076-4-101 Style B
C : IEC 61076-4-101 Style C
D : IEC 61076-4-101 Style D
E : IEC 61076-4-101 Style E
M : IEC 61076-4-101 Style M
AB : Compact PCI AB type equivalent
(
For Compact PCI P2/J2, P5/J5 equivalent,
the IEC type should be style B.
)
5
4
Applicable connector
A : for PCN21*-110SA-2PF-G
B : for PCN21*-125SB-2PF-G
C : for PCN21*-55SC-2PF-G
D : for PCN21B-176SD-2PF-G
E : for PCN21B-200SE-2PF-G
B1: for PCN21*-110SB-2PF-G
B2: for PCN21*-095SB-2PF-G
Bottom ground plate for receptacle
PCN 2 1
*
- S A - G
1
2
3
4
1
Series name: PCN21
2
A···PCB leads : Gold plated
B···PCB leads : Tin plated
3
Connector classification
S : For receptacle
5
Ground
B
Product construction (5 row)
qHeader
3.7
BWB
qReceptacle
Row f: Top ground plate
Row
f
e
d
c
b
a
z
PKG
Row z: Bottom ground plate
PCN21*-S*-G
Row
a b c d e f
13
14.5
16
3
5.3
6.8
8.3
A ground plate is joined with the f row.
Rows f and z are ground terminals.
PCN21*-*P*-2PF (W) has no ground terminal
PCN21*-*P*-2PF (W)-G has ground terminal
PCN21*-*S*-2PF has no top ground plate
PCN21*-*S*-2PF-G has top ground plate
PCN21*-S*-G has bottom ground plate only
4
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
sProduct
Specifications
Current rating 1.5A
Rating
Operating temperature –55ç to +85ç(Note
1)
Storage temperature
95% RH max.
(No condensation)
Item
Requirements
1.Insulation resistance 10
4
Mø
2.Withstanding voltage No flashover or breakdown
3.Contact resistance 30 mø max.
4.Vibration
5.Damp heat
6.Rapid change of
temperature
7.Heat resistance
8.Operation life
No electrical discontinuity for 1µs min.
Contact resistance: 40 mø max.
Insulation resistance: 10
3
Mø min.
Contact resistance:40 mø max.
Insulation resistance: 10
3
Mø min.
No damage, cracks or parts dislocation
Contact resistance:40 mø max.
Insulation resistance: 10
3
Mø min.
Contact resistance:40 m ohms max.
Test Conditions
100 V DC
750 V rms AC / 1 min
0.1 A
Frequency 10 to 500 Hz, single amplitude of 0.35 mm,
acceleration of 50m/s
2
, 10 cycles in each of the 3 axis.
96 hours at temperature of 40ç
±
2ç
and RH of 90% to 95%
Temperature :
–55ç
➝
+15ç
to
+30ç
➝
+125ç
➝
+15ç
to
+30ç
Duration
:
–30
➝
+5max.
➝
+30
➝
+5max.(Minutes)
5 cycles
16 hours at temperature of 125ç
500 cycles
Storage humidity
–10ç to +60ç(Note
2)
40% to 70% RH
(Note 2)
Voltage rating AC 300V Operating humidity
Note 1: Includes temperature rise caused by the current flow.
Note 2: The term “storage” refers to products stored for long period of time prior to mounting and use. Operating temperature range
and humidity range covers non-conducting condition of installed connectors in storage, shipment or during transportation.
This dynamic Near Field Communication (NFC) tag design outlines the required components and layout considerations, and provides firmware examples to illustrate how to implement NFC into applications s...
[i=s]This post was last edited by cxmin on 2019-6-21 10:48[/i]In daily life, people often cannot stay away from the influence of radioactive radiation, such as going to the hospital for CT scans. Espe...
I. IntroductionThe onboard w800 wifi module of RVB2601 can be easily connected to the Feiyan platform of Alibaba Cloud. This article will explain how to upload MCU data to the Feiyan platform and how ...
1. Compilation feedback and optimizationThe TIC6000 compiler can optimize the code in various ways to increase the execution speed and reduce the size of the code. These optimizations include simplify...
The output of MPXV2202DP connected to IN132 is abnormal. The differential output of MPXV2202DP is 0-16.3mV when unloaded. After connecting to IN132, it is fixed to 60mV. I think it is an impedance mat...
In recent years, China's lighter market has developed rapidly, not only in the domestic market, but also in the world market. According to statistics, the global demand for lighters is 16 billion per ...[Details]
The calibrated on-chip RC oscillator provides a fixed 8 MHz or 4 MHz clock. These frequencies are nominal values at 3V and 25°C. If the frequency exceeds the device nominal value, the CKDIV8 fuse m...[Details]
From wafer foundries and packaging plants to IC design companies and system manufacturers, they have all begun to use advanced packaging as a direction to break Moore's Law. As a back-end process of ...[Details]
By Joel Hagberg, Head of Product Management and Marketing for Intel RealSense Technologies In recent years, there has been an increasing adoption of environmental sensing, including LiDAR laser rang...[Details]
At the Chengdu Auto Show, Great Wall Motors' Euler Cherry Cat, equipped with cobalt-free batteries, was officially unveiled. This car will be launched in two versions. The lithium iron phosphate vers...[Details]
Marvell Technology Group Ltd. (NASDAQ: MRVL), a leader in infrastructure semiconductor solutions, today announced that it will join Facebook Connectivity in the Evenstar program to provide Evenstar w...[Details]
O Introduction
In cable production lines, it is usually necessary to detect the cable running speed to control the speed of the take-up motor and calculate the length of the cable. The sta...[Details]
According to a report by The Wall Street Journal on November 22, people familiar with the matter revealed that Samsung Electronics will choose to invest about $17 billion to build a chip factory in T...[Details]
This Design Idea uses the large operating voltage range of an octal CMOS buffer to present a simple eight-bit two-quadrant multiplying digital-to-analog converter (DAC) consisting of the buffer/line ...[Details]
Friends who design small package products may know about 3225-4PIN crystal oscillators. Why is the bulk price of 8MHZ crystal oscillators 2 yuan per piece, while 16MHZ crystal oscillators only need 0...[Details]
2023 has arrived at its last working day, and this ordinary yet extraordinary year has slowly come to an end.
This year, the industry is calling for the first year of surgical
robots
,...[Details]
OFweek Cup 2022 China
Robot
Industry Annual Awards (abbreviated as OFweek Robot Awards 2022) is jointly organized by OFweek, China's high-tech industry portal, and its authoritative robo...[Details]
Recently, Delphi Technologies announced that it will produce an 800V inverter, becoming the main supplier of such parts in the automotive industry. It is reported that compared with the 400V charging...[Details]
0 Preface With the development of integrated circuits and the adoption of digital signal processing technology, digital oscilloscopes have become intelligent measuring instruments that integrate vari...[Details]
Tesla has always emphasized the power of its pure vision autonomous driving solution. When humans perceive and understand the world, 70%-80% of the data is processed through vision. This at least m...[Details]
Wireless Connectivity
京公网安备 11010802033920号
EEWORLD
