Resistance to sulphur-bearing gas (AS version only): ASTM-B-809
Voltage proof
Volts
Note: A 0.01 Ohm addition to be added to the performance of all resistors <10 Ohms.
ΔR%
ΔR%
ΔR%
ΔR%
ΔR%
1
1
1
0.25
0.25
0.25
500
ΔR%
ΔR%
Maximum
1
0.1
Zero at 155°C
0.1
0.2
0.25
0.05
0.05
0.05
Typical
0.25
0.02
Pulse Performance Data
Pulse Performance Data
Lightning Surge
Lightning surge resistors are tested in accordance with IEC 60 115-1 using both 1.2/50µs and 10/700µs pulse shapes. 10 pulses are applied. The limit of
acceptance is a shift in resistance of less than 1% from the initial value.
2512
2010
1206
0805
0603
Lightning Surge
Lightning surge resistors are tested in
accordance with IEC 60 115-1 using
both 1.2/50µs and 10/700µs pulse shapes.
10 pulses are applied. The limit of
acceptance is a shift in resistance of less
than 1% from the initial value.
2512
2010
1206
0805
0603
General Note
TT Electronics reserves the right to make changes in product specification without notice or liability.
All information is subject to TT Electronics’ own data and is considered accurate at time of going to print.
The single impulse graph is the result of 50 impulses of rectangular shape applied at one minute intervals. The limit of acceptance was a shift in
resistance of less than 1% from the initial value.
2512
2010
1206
0805
0603
Continuous Load Due to Repetitive Pulses
The continuous load graph was obtained by applying repetitive rectangular pulses where the pulse period was adjusted so that the average
power dissipated in the resistor was equal to its rated power at 70°C. Again the limit of acceptance was a shift in resistance of less than 1% from the
initial value
2512
2010
1206
0805
0603
General Note
TT Electronics reserves the right to make changes in product specification without notice or liability.
All information is subject to TT Electronics’ own data and is considered accurate at time of going to print.
Hello everyone! I am not familiar with high-voltage design, so I would like to ask you two questions: The following circuit is drawn with reference to a forum user. After rectification, a voltage regu...
2021 is sure to be an extremely busy year for cybersecurity teams at global automotive companies.Because when cybersecurity rises from a hot technology to a necessary requirement for market access and...
Live Topic : Microchip Live | Secure Configuration of MPUs in Your FactoryContent Introduction: Secure provisioning is a process that allows you to securely instantiate a microprocessor (MPU) root of ...
Layered thinkingThe layered thinking is not something mysterious. In fact, many engineers who do projects also use it. I have read many posts and found that this thing is not mentioned. However, the l...
Software development environment: CCS3.1, set to Simulator mode in CCS Setup
CPU：TMS320C6416The project contains three files: main.c, Vectors.asm, BootLoader.cmd
In addition, a library file was added:...
The program I wrote failed to burn, but the reference code given by others burned successfully. The compiler is CodeWarrior. The chip is MC9S08AW60. The device manager USB MultiLink 2.0 runs normally....
Power technology
京公网安备 11010802033920号
EEWORLD
