TCG402U015N1L datasheet, PDF - EEWORLD Datasheet

Datasheet> All Categories > Passive components> TCG402U015N1L

TCG402U015N1L: DescriptionAluminum Electrolytic Capacitors - Leaded 4000uF 15Volts; CategoryPassive components; File Size138KB，4 Pages; ManufacturerCornell Dubilier

Download Datasheet Parametric View All

TCG402U015N1L Online Shopping

Suppliers	Part Number	Price	MOQ	In stock
	TCG402U015N1L	-	-	View	Buy Now

TCG402U015N1L Overview

Aluminum Electrolytic Capacitors - Leaded 4000uF 15Volts

TCG402U015N1L Parametric

Parameter Name	Attribute value
Product Attribute	Attribute Value
Manufacturer	Cornell Dubilier
Product Category	Aluminum Electrolytic Capacitors - Leaded
Product	Computer Grade Electrolytic Capacitors
Termination Style	Axial
Capacitance	4000 uF
Voltage Rating DC	15 VDC
Minimum Operating Temperature	- 40 C
Maximum Operating Temperature	+ 85 C
Factory Pack Quantity	1

Preview

Download Datasheet

View All

Type TCG

Axial Leaded Aluminum Electrolytic Capacitors

85 ºC Computer Grade Capacitor

Type TCG is an axial leaded, 85 ºC, industrial and com-

puter grade quality aluminum electrolytic capacitor that

is suitable for computers, communication equipment

and power supplies.

Highlights

•

Industrial grade

Computer grade

Low proﬁle mounting

Speciﬁcations

Capacitance Range:

10 to 10,000 µF

Voltage Range:

10 to 450 WVdc

Capacitance Tolerance:

10 to 75 WVdc, –10 +75%

150 to 450 WVdc, –10 +50%

Operating Temperature Range:

–40 ºC to 85 ºC

DC Leakage Current:

I= 6 √CV after 5 minutes

Not to exceed 3 mA @ 25 ºC

I = leakage current in µA

C = Capacitance in µF

V = Rated voltage

Ripple Current Multipliers:

Rated

Ripple Multipliers

WVdc

0 to 50

51 to 150

151 & up

Ambient Temp.

Ripple Multiplier

60 Hz

0.8

400 Hz

1.05

1.08

1.15

1000 Hz

1.10

1.13

1.21

2400 Hz

1.14

1.16

1.25

+45 ºC +55 ºC +65 ºC +75 ºC +85 ºC

2.2

2.0

1.7

1.4

1.0

QA Stability Test:

Apply WVdc for 1,000 h at 85 ºC

• Capacitance change ±15% from initial limits

• DC leakage current meets initial limits

• ESR ≤150% of initial measured value

Outline Drawing

1/32 Approx

Vent

2.500

±.250

±.031

2.500

±.250

Molded

Plastic Seal

±.015

Parts are supplied with PVC insulating sleeve.

Add .010" to diameter and .125" max

to length to allow for insulation.

(Inches)

CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com

Notice and Disclaimer:

All product drawings, descriptions, specifications, statements, information and

data (collectively, the “Information”) in this datasheet or other publication are subject to change. The

customer is responsible for checking, confirming and verifying the extent to which the Information con-

tained in this datasheet or other publication is applicable to an order at the time the order is placed. All

Information given herein is believed to be accurate and reliable, but it is presented without any guaran-

tee, warranty, representation or responsibility of any kind, expressed or implied. Statements of suitability

for certain applications are based on the knowledge that the Cornell Dubilier company providing such

statements (“Cornell Dubilier”) has of operating conditions that such Cornell Dubilier company regards

as typical for such applications, but are not intended to constitute any guarantee, warranty or representa-

tion regarding any such matter – and Cornell Dubilier specifically and expressly disclaims any guarantee,

warranty or representation concerning the suitability for a specific customer application, use, storage,

transportation, or operating environment. The Information is intended for use only by customers who

have the requisite experience and capability to determine the correct products for their application. Any

technical advice inferred from this Information or otherwise provided by Cornell Dubilier with reference

to the use of any Cornell Dubilier products is given gratis (unless otherwise specified by Cornell Dubilier),

and Cornell Dubilier assumes no obligation or liability for the advice given or results obtained. Although

Cornell Dubilier strives to apply the most stringent quality and safety standards regarding the design

and manufacturing of its products, in light of the current state of the art, isolated component failures may

still occur. Accordingly, customer applications which require a high degree of reliability or safety should

employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies

or other appropriate protective measures) in order to ensure that the failure of an electrical component

does not result in a risk of personal injury or property damage. Although all product-related warnings,

cautions and notes must be observed, the customer should not assume that all safety measures are indi-

cated in such warnings, cautions and notes, or that other safety measures may not be required.

Recommended Resources

Touch switch circuit

OCL power amplifier circuit

DN35 typical application circuit diagram a

STK077G power amplifier circuit

DT930F/DT930G/DT930Ft/DT930FG type 4 1/2 digit digital multimeter

50～1000kHz transistor oscillator

What are the two parts of RFID?: Radio frequency identification (RFID) technology is a contactless automatic identification technology. Its basic principle is to use radio frequency signals and their spatial coupling and transmission...; Jacktang Wireless Connectivity

Mobile Phone Radiation Survey Research Report: ??The National Academy of Engineering of the United States recently announced the list of new academicians, and a total of three Chinese scholars were selected. In the previous issue of this magazine,...; backstreets RF/Wirelessly

How to use the virtual serial port VCOM function of J-Link?: Most modern PCs no longer have physical COM ports. However, many hardware setups still use UART for logging, diagnostics, and application control. The alternative is to use a USB device that appears a...; MamoYU Integrated technical exchanges

HD7279A controls digital tube (IAR environment): /***************************************************************************IAR environment, HD7279A, P4.0~CS, P4.1~CLK, P4.2~DATA, P4,3~KAY,DATA is the serial port data port, the timing diagram is as...; 灞波儿奔 Microcontroller MCU

This mood light seems more suitable for festivals: This mood light seems more suitable for festivals:https://www.instructables.com/Rolling-Lamp/...; soso Power technology

Bumpy B-U585I-IOT02A review, BLE: [i=s]This post was last edited by littleshrimp on 2021-10-2 14:15[/i]Finally IAR 9.10.2 is downloaded, and I can finally download the BLE_AT_Client example. The download and run speed is still very fa...; littleshrimp stm32/stm8

Shortcut: S0 S1 S2 S3 S4 S5 S6 S7 S8 S9 SA SB SC SD SE SF SG SH SI SJ SK SL SM SN SO SP SQ SR SS ST SU SV SW SX SY SZ T0 T1 T2 T3 T4 T5 T6 T7 T8 T9 TA TB TC TD TE TF TG TH TI TJ TK TL TM TN TO TP TQ TR TS TT TU TV TW TX TY TZ U0 U1 U2 U3 U4 U6 U7 U8 UA UB UC UD UE UF UG UH UI UJ UK UL UM UN UP UQ UR US UT UU UV UW UX UZ V0 V1 V2 V3 V4 V5 V6 V7 V8 V9 VA VB VC VD VE VF VG VH VI VJ VK VL VM VN VO VP VQ VR VS VT VU VV VW VX VY VZ W0 W1 W2 W3 W4 W5 W6 W7 W8 W9 WA WB WC WD WE WF WG WH WI WJ WK WL WM WN WO WP WR WS WT WU WV WW WY X0 X1 X2 X3 X4 X5 X7 X8 X9 XA XB XC XD XE XF XG XH XK XL XM XN XO XP XQ XR XS XT XU XV XW XX XY XZ Y0 Y1 Y2 Y4 Y5 Y6 Y9 YA YB YC YD YE YF YG YH YK YL YM YN YP YQ YR YS YT YX Z0 Z1 Z2 Z3 Z4 Z5 Z6 Z8 ZA ZB ZC ZD ZE ZF ZG ZH ZJ ZL ZM ZN ZP ZR ZS ZT ZU ZV ZW ZX ZY

Popular Components