or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice.
www.latticesemi.com
1
DS1020_23.5
ispMACH 4000V/B/C/Z Family Data Sheet
Table 2. ispMACH 4000Z Family Selection Guide
ispMACH 4032ZC
Macrocells
I/O + Dedicated Inputs
t
PD
(ns)
t
S
(ns)
t
CO
(ns)
f
MAX
(MHz)
Supply Voltage (V)
Max. Standby Icc (µA)
Pins/Package
32
32+4/32+4
3.5
2.2
3.0
267
1.8
20
48 TQFP
56 csBGA
ispMACH 4064ZC
64
32+4/32+12/
64+10/64+10
3.7
2.5
3.2
250
1.8
25
48 TQFP
56 csBGA
100 TQFP
132 csBGA
ispMACH 4128ZC
128
64+10/96+4
4.2
2.7
3.5
220
1.8
35
ispMACH 4256ZC
256
64+10/96+6/
128+4
4.5
2.9
3.8
200
1.8
55
100 TQFP
132csBGA
100 TQFP
132 csBGA
176 TQFP
ispMACH 4000 Introduction
The high performance ispMACH 4000 family from Lattice offers a SuperFAST CPLD solution. The family is a blend
of Lattice’s two most popular architectures: the ispLSI
®
2000 and ispMACH 4A. Retaining the best of both families,
the ispMACH 4000 architecture focuses on significant innovations to combine the highest performance with low
power in a flexible CPLD family.
The ispMACH 4000 combines high speed and low power with the flexibility needed for ease of design. With its
robust Global Routing Pool and Output Routing Pool, this family delivers excellent First-Time-Fit, timing predictabil-
ity, routing, pin-out retention and density migration.
The ispMACH 4000 family offers densities ranging from 32 to 512 macrocells. There are multiple density-I/O com-
binations in Thin Quad Flat Pack (TQFP), Chip Scale BGA (csBGA) and Fine Pitch Thin BGA (ftBGA) packages
ranging from 44 to 256 pins/balls. Table 1 shows the macrocell, package and I/O options, along with other key
parameters.
The ispMACH 4000 family has enhanced system integration capabilities. It supports 3.3 V (4000V), 2.5 V (4000B)
and 1.8 V (4000C/Z) supply voltages and 3.3 V, 2.5 V and 1.8 V interface voltages. Additionally, inputs can be
safely driven up to 5.5 V when an I/O bank is configured for 3.3 V operation, making this family 5 V tolerant. The
ispMACH 4000 also offers enhanced I/O features such as slew rate control, PCI compatibility, bus-keeper latches,
pull-up resistors, pull-down resistors, open drain outputs and hot socketing. The ispMACH 4000 family members
are 3.3 V/2.5 V/1.8 V in-system programmable through the IEEE Standard 1532 interface. IEEE Standard 1149.1
boundary scan testing capability also allows product testing on automated test equipment. The 1532 interface sig-
nals TCK, TMS, TDI and TDO are referenced to V
CC
(logic core).
Overview
The ispMACH 4000 devices consist of multiple 36-input, 16-macrocell Generic Logic Blocks (GLBs) interconnected
by a Global Routing Pool (GRP). Output Routing Pools (ORPs) connect the GLBs to the I/O Blocks (IOBs), which
contain multiple I/O cells. This architecture is shown in Figure 1.
2
ispMACH 4000V/B/C/Z Family Data Sheet
Figure 1. Functional Block Diagram
CLK0/I
CLK1/I
CLK2/I
CLK3/I
V
CCO0
GND
V
CCO1
GND
I/O
Block
ORP
I/O Bank 1
16
36
Generic
16
Logic
Block
I/O
Block
ORP
GOE0
GOE1
V
CC
GND
TCK
TMS
TDI
TDO
I/O
Block
ORP
I/O Bank 0
16
Global Routing Pool
Generic
Logic
Block
16
36
16
36
Generic
16
Logic
Block
I/O
Block
ORP
16
Generic
Logic
Block
16
36
The I/Os in the ispMACH 4000 are split into two banks. Each bank has a separate I/O power supply. Inputs can
support a variety of standards independent of the chip or bank power supply. Outputs support the standards com-
patible with the power supply provided to the bank. Support for a variety of standards helps designers implement
designs in mixed voltage environments. In addition, 5 V tolerant inputs are specified within an I/O bank that is con-
nected to V
CCO
of 3.0 V to 3.6 V for LVCMOS 3.3, LVTTL and PCI interfaces.
ispMACH 4000 Architecture
There are a total of two GLBs in the ispMACH 4032, increasing to 32 GLBs in the ispMACH 4512. Each GLB has
36 inputs. All GLB inputs come from the GRP and all outputs from the GLB are brought back into the GRP to be
connected to the inputs of any other GLB on the device. Even if feedback signals return to the same GLB, they still
must go through the GRP. This mechanism ensures that GLBs communicate with each other with consistent and
predictable delays. The outputs from the GLB are also sent to the ORP. The ORP then sends them to the associ-
ated I/O cells in the I/O block.
Generic Logic Block
The ispMACH 4000 GLB consists of a programmable AND array, logic allocator, 16 macrocells and a GLB clock
generator. Macrocells are decoupled from the product terms through the logic allocator and the I/O pins are decou-
pled from macrocells through the ORP. Figure 2 illustrates the GLB.
3
ispMACH 4000V/B/C/Z Family Data Sheet
Figure 2. Generic Logic Block
CLK0
CLK1
CLK2
CLK3
To GRP
Clock
Generator
1+OE
16 MC Feedback Signals
1+OE
1+OE
1+OE
1+OE
1+OE
1+OE
1+OE
To ORP
To
Product Term
Output Enable
Sharing
Logic Allocator
36 Inputs
from GRP
AND Array
The programmable AND Array consists of 36 inputs and 83 output product terms. The 36 inputs from the GRP are
used to form 72 lines in the AND Array (true and complement of the inputs). Each line in the array can be con-
nected to any of the 83 output product terms via a wired-AND. Each of the 80 logic product terms feed the logic
allocator with the remaining three control product terms feeding the Shared PT Clock, Shared PT Initialization and
Shared PT OE. The Shared PT Clock and Shared PT Initialization signals can optionally be inverted before being
fed to the macrocells.
Every set of five product terms from the 80 logic product terms forms a product term cluster starting with PT0.
There is one product term cluster for every macrocell in the GLB. Figure 3 is a graphical representation of the AND
Array.
AND Array
36 Inputs,
83 Product Terms
4
16 Macrocells
ispMACH 4000V/B/C/Z Family Data Sheet
Figure 3. AND Array
In[0]
In[34]
In[35]
PT0
PT1
PT2
PT3
PT4
Cluster 0
PT75
PT76
PT77
Cluster 15
PT78
PT79
PT80 Shared PT Clock
PT81 Shared PT Initialization
PT82 Shared PTOE
Note:
Indicates programmable fuse.
Enhanced Logic Allocator
Within the logic allocator, product terms are allocated to macrocells in product term clusters. Each product term
cluster is associated with a macrocell. The cluster size for the ispMACH 4000 family is 4+1 (total 5) product terms.
The software automatically considers the availability and distribution of product term clusters as it fits the functions
within a GLB. The logic allocator is designed to provide three speed paths: 5-PT fast bypass path, 20-PT Speed
Locking path and an up to 80-PT path. The availability of these three paths lets designers trade timing variability for
increased performance.
The enhanced Logic Allocator of the ispMACH 4000 family consists of the following blocks:
• Product Term Allocator
• Cluster Allocator
• Wide Steering Logic
Figure 4 shows a macrocell slice of the Logic Allocator. There are 16 such slices in the GLB.
AT32WB415 is a microcontroller that uses low-power (BLE) Bluetooth 5.0 and is equipped with corresponding debugging and downloading tools on the board. However, its peripheral configuration is relativ...
First of all, the development environment is Manjaro Linux, kernel 5.0, rolling upgrade version, always up to date, CCS is also the latest CCv 8
Copy code1 #include "DSP2833x_Device.h" // This is a ve...
When I browse forums and chat with friends in private, I often encounter netizens asking if there are any power chips with good performance, cheap and easy to use in certain aspects?
Generally, I help...
Based on the experience in DC-DC AC-DC isolated power modules and the response of customers, I would like to express my own views on the reliability of power modules.Most of the current simulation and...
[i=s]This post was last edited by tiankai001 on 2019-1-2 10:16[/i] [align=left][color=rgb(34, 34, 34)][font=宋体][size=4]1. The power supply of TTL circuits is +5V, so the power supply voltage cannot be...
In the field of Internet of Vehicles, car companies' desire for control is becoming stronger. In early July, at the Geely Boyue PRO launch conference, Ecarx’s second intelligent connected product G...[Details]
/********************************************** Functional description: Use TMR0 interrupt to scan digital tube and generate second clock signal. Microcontroller: PIC16F72, PIC16F877, PIC16F873, et...[Details]
In this system, the 8031 on-chip RAM and the 8155 on-chip RAM are used as monitoring work units, and the external 2K RAM is used as the collected data buffer, print buffer, keyboard and display b...[Details]
1 Introduction
An insulated gate bipolar transistor (IGBT) is a device that is a combination of a bipolar transistor and a MOSFET. It has both the gate voltage-controlled fast switchin...[Details]
If nothing unexpected happens, Samsung will continue to launch the new generation of Galaxy Note20 series flagships in the second half of this year. As June draws to a close, this blockbuster n...[Details]
Abstract: Semiconductor LD-pumped solid-state lasers have high requirements on power supply. The power supply needs to have the functions of slow start and microcomputer control of laser power. ...[Details]
background
Even before the threat of terrorism gained worldwide attention, many public and private organizations began installing video security systems in critical infrastructure. Video s...[Details]
According to Jiwei.com, in 2021, benefiting from the global chip shortage and the chip price increase, the performance of A-share semiconductor companies is generally gratifying. According to incompl...[Details]
Laird Thermal Systems OptoTEC OTX/HTX Thermoelectric Coolers Now Available at Mouser for Optoelectronics, LiDAR, and Other Applications August 27, 2021 – Mouser Electronics, an authorized global di...[Details]
/***************Selectable internal or external clock*******************/
#ifdef HSE_EXT
void ClkInit(void)
{
CLK_ICKR = 0X00; //Disable high-speed internal clock, fast wakeup from Halt or Active...[Details]
PolyU and Wuxi Municipal Government jointly establish the Science and Technology Innovation Institute to promote government-industry-university-research collaboration in the Yangtze River Delta and c...[Details]
For anyone who has researched a new car recently, it’s hard not to notice how rapidly automotive electronics have evolved. Compare the automotive safety technology of just three years ago to today’s ...[Details]
Recently, Advantest, a world-leading test machine manufacturer, announced the acquisition of R&D Altanova, a well-known American test probe card manufacturer. Coincidentally, on August 27, Taiwan-bas...[Details]
The all-vanadium liquid flow energy storage battery production project is one of the key projects newly started in Dunhua City in 2024. Since the start of construction of the project, the construction...[Details]
RF/Wirelessly
京公网安备 11010802033920号
EEWORLD
