One Technology Way · P.O. Box 9106 · Norwood, MA 02062-9106 · Tel: 781.329.4700 · Fax: 781.461.3113 ·
www.analog.com
AD-FMCMOTCON1-EBZ User Guide
The
AD-FMCMOTCON1-EBZ
is a complete motor drive system on an FMC board. Information on the
card, and how to use it, the design package that surrounds it, and the software which can make it
work, can be found here.
The purpose of the
AD-FMCMOTCON1-EBZ
is to provide a complete motor drive system
demonstrating efficient control of Brushed DC, BLDC, PMSM and Stepper motors. It consists of 2
boards: a controller board and a drive board. The system incorporates high quality power sources;
reliable power, control, and feedback signals isolation; accurate measurement of motor current &
voltage signals; high speed interfaces for control signals to allow fast controller response; industrial
Ethernet high speed interfaces; flexible control with FPGA/SoC interface.
The
AD-DYNO1-EBZ
dynamometer is provided as an extension of the drive system. This is a
dynamically adjustable load that can be used to test real-time motor control performance. It consists
of two BLDC motors directly coupled through a rigid connection. One of the BLDC motors acts as a
load and is controlled by the DYNO’s embedded control system while then second motor is driven by
the
AD-FMCMOTCON1-EBZ.
This platform is intended to be used as a prototyping system to verify the hardware and the control
algorithms before moving to the production stage. It helps reduce the time needed to move a motor
control system from concept to production. Example reference designs showing how to use the
control solution with Xilinx FPGAs or SoCs and Simulink from Mathworks are provided together with
the hardware.
1.
Introduction
Rev 08 May 2014 11:37 | Page 1
© Analog Devices, Inc. All rights reserved. Trademarks and
registered trademarks are the property of their respective owners.
www.analog.com
Rev 08 May 2014 11:37 | Page 3
京公网安备 11010802033920号
EEWORLD
