NV Series
Compact and Simple, Extremely High Cost Performance
Programmable Terminal
The Best PT for Package PLCs
A Lineup of 14 Models That Redefine “Compact”
The Best PT for
Package PLCs- NV
The NV Series of compact Programmable Terminals meet
the basic needs for enhanced visibility, simplicity, and
cost, and they go even further to provide superior PLC
compatibility, easy operation, and cost performance.
V
isibility
Beautiful, Easy-to-understand Displays
Instantly know the system status
Easy Visual Recognition
It is obvious in three color LED backlight
The monochrome models provide three backlight colors to
perform status displays.For example, use green for normal
operation, orange for user controls, and red for errors so that
the operating status can be seen at a glance.
NV
W-MG
User Controls
Orange
True Type Fonts for Flexible Screen Designs
You can use True Type fonts in a wide range of sizes from 10
to 240 dots to flexibly design beautiful screens.
* The maximum font size depends on the model.
True Type Fonts
Error Displays
Red
Normal Operation
Green
NV W-MR / NV3Q-MR
Normal Operation
White
The red backlight
makes error displays bright
and easy to see.
You can select the
best Windows
®
fonts to create
the desired
screen images or
emphasize screen
appearance.
User Controls
Pink
Error Displays
Red
V
ariation
A Lineup of 14 Models That Form a New Standard for Small
inch
Display colors :
Monochrome , 2 grayscale levels
128 × 64 dots
Backlight :
LEDs, 3 colors (green, orange, and red)
Display colors :
Monochrome , 2 grayscale levels
128 × 64 dots
Backlight :
LEDs, 3 colors (white, pink, and red)
3.1
2
NV3W
Monochrome STN
A 5-V model is available that can
be powered from an OMRON PLC
Compact Horizontal Models
4.6
USB Slave
USBス
ブ
レー
Vertical installation
RS-232C
5 VDC
RS-422A/485
24 VDC
DC 24V
SD memory card
inch
Display colors : Monochrome ,
2 grayscale levels or 8 grayscale levels
320 × 120 dots
Backlight :
LEDs, 3 colors (green, orange, and red)
NV4W
Monochrome STN
Compact Horizontal Models
USB Slave
USBス ブ
レー
Vertical installation
縦½き
RS-232C
RS-232C
5 VDC
DC 5V
“
V
”
stands for the three benefits
Easy design work and superior PLC compatibility
Beautiful, easy-to-understand displays
A lineup of ten 3-inch models for easy selection
Value
Visiblity
Variation
V
alue
Easy Designing
The slim design of NV-series PTs
requires very little installation space.
Global Application
Vertical Installation
The PT can be installed vertically to enable more
applications.This enables more flexible designs.
Multi-language Support and Safety Standard Compliance
You can switch parts labels and languages. Record up to sixteen character strings in
different languages and change all labels at the same time. Switching the language
during operation is also very easy. International safety standards have also been met
so that you can easily export equipment or transport equipment overseas.
Switch
Parts
Labels
Japanese
English*
Simplified Traditional
Chinese
Chinese
Safety Standards
Korean
* Including
European
languages.
Handle Devices from Various Manufacturers
Global Multivendor Support
You can connect the PT to OMRON or Mitsubishi Electric PLCs or to PLCs from many
other global manufacturers.This lets you connect the NV-series PTs without changing
the PLC. You can easily use a different PLC manufacturer for each project.
28
mm
Vertical
Installation Supported
Supported by NV3W and NV4W
Applicable
PLCs
OMRON, Mitsubishi Electric, Keyence, Hitachi,
Allen-Bradley, Siemens, etc.
PTs
The lineup includes compact and horizontal models from 3.1-inch to 4.6-inch and QVGA models.
Select the size and price that are best for each system.
3.6
Display colors : Monochrome ,
2 grayscale levels or 8 grayscale levels
320 × 120 dots
Backlight :
LEDs, 3 colors (white, pink, and red)
RS-422A/485
RS-422A/485
24
24V
DC
VDC
SD memory card
SDメ リ ド
モ カー
inch
Display colors :
Monochrome , 2 grayscale levels
320 × 240 dots
Backlight :
LEDs, 3 colors (white, pink, and red)
Display colors : 4096 colors
320 × 240 dots
Backlight : White LED
NV3Q
Monochrome STN
Color TFT
QVGA Models
USB Slave
USBス ブ
レー
Vertical installation
縦½き
RS-232C
RS-232C
5 VDC
DC 5V
RS-422A/485
RS-422A/485
24
24V
DC
VDC
SD memory card
SDメ リ ド
モ カー
3
Easy Connection to External Devices
NV3W-MG 0 (L)
Monochrome STN
NV3W-MR 0(L)
Monochrome STN
Compact Horizontal Models
Battery-free Operation
Internal Storage of Required Data in the PT
An NV-series PT can be operated without a battery.
No maintenance battery is required.
Data Backed Up without a Battery
NV Configuration
Base Screens
Keyboard Screens
Recipes
Write Address Data
Flow Display Data
Data required for
operation is
backed up
RS-232C Cable
XW2Z-200T-4
Programming Device Connecting Cable
NV-TOL-3M
PLC
NV-Designer
USB-Serial
Conversion Cable
CS1W-CIF31
Serial Communications/Power Supply Connector
Supply Power from the PLC
NV3W Only
Tool Port
Compatibility
Transfer Ladder Programs and
PT Screens without Changing the Cable
Ladder programs can be transferred, debugged, or monitored for an
OMRON PLC from the CX-Programmer running on a computer connected
to the NV-series PT while communicating through the NV-series PT.
Computer running
NV-Designer
CX-Programmer
Communicate
through the PT
Ladder diagrams can be transferred
and the PLC can be monitored from
the CX-Programmer.
Compatibility
With 5-V NV3W models, 5-V can be supplied from the PLC
via the PLC Connecting Cable.This reduces wiring work and
eliminates the need for a special power supply for the PT.
Supplying 5-V from the PLC
Host Link connection
5-V
power supply
NV3W
External power
supply not required
PLC Connecting Cable
with 5-V Line
PLC
CP/CJ/CS
series
Same cable as for
the NV-Designer
Host Link
connection
*An XW2Z-200T-4 PLC Connecting Cable is required to supply power from the PLC.
*With 24-V PTs, power must be supplied from an external power supply.
No need to change
the cable between
the PT and PLC.
4
*Refer to Support Software on page 7 for
applicable versions of the CX-One.
PLC
CP/CJ/CS
series
for Easy Maintenance
NV4W
4.6 inch
Compact Horizontal Models
NV4W-MG 1
Monochrome STN
NV4W-MR□1
Monochrome STN
Battery-free Operation
Internal Storage of Required Data in the PT
An NV-series PT can be operated without a battery.
No maintenance battery is required.
Data Backed Up without a Battery
NV Configuration
Base Screens
Keyboard Screens
Optional Battery
NV-BAT01
Back up PLC memory in the PT with an optional battery.
An optional battery can be mounted in an NV4Q PT to back up specified
addresses from PLC memory. This allows you, for example, to back up memory
areas that are not held in the PLC when using a CP1E PLC without a battery.
Data That Can Be Backed Up with a Battery
Up to 24 words of
PLC memory
Clock data
Internal PT memory
Alarm history
Password
CP1E
Recipes
Write Address Data
Flow Display Data
Data required for
operation is
backed up
Back up
words from
PLC memory
Commercially
available
USB cable
(Mini-B)
24-V power supply
SD Memory Card
An SD memory card slot (2 GB max.)
is provided as a standard feature
Use SD memory cards to easily
back up and restore screen
data.
PLC
Tool Port
NV-Designer
Compatibility
Transfer Ladder Programs and
PT Screens without Changing the Cable
Serial Communications/Power Supply Connector
This connector supplies 24 VDC.
USB1.1
High-speed Screen Transfers with
Commercially Available USB Cable
A USB interface is provided to effectively use computer
software environments.Screens that are created on the
computer can be quickly transferred to the PT using a
commercially available USB cable (Mini-B).
5