LFXTAL052286Reel

The 5G networks of the three major operators have officially started commercial use, ushering in the first year of 5G networks in my country. At present, operators are actively accelerating the const...[Details]

When writing microcontroller programs, we generally like to use printf to print debugging information through the serial port, but this function cannot be used directly, and some changes must be made...[Details]

Memory management in C language is mainly implemented based on malloc and free. Malloc is mainly used to allocate memory, while free is used to release memory. Although we are already familiar with t...[Details]

There are two types of bursting strength testers: hydraulic bursting and pneumatic bursting. The hydraulic pressure acts on the test sample above the rubber tympanic membrane to burst the tested samp...[Details]

1. Module Division i) (Main module) Video capture and playback ii) Display mode switching iii) Take photos iv) Video recording v) fps display vi) View and delete video...[Details]

1. Overview In the field of electrical transmission, with the continuous improvement of the technical level of self-shutoff devices, pulse width modulation technology (PWM technology for s...[Details]

The microcontroller source program is as follows: /********************************************************************** * $Id nbsp;               mcu_main_new.c                        2012-05-04 *...[Details]

We all know about FLASH and EEPROM memories, but most people are familiar with specialized FLASH and EEPROM chips, such as W25Q16 and ATAT24C08 (external) storage chips. The biggest difference betw...[Details]

Technological innovation in the workplace, especially the widespread use of new technologies such as artificial intelligence, robots and trackers, has triggered deep thinking about the qual...[Details]

This parameter refers to the main function of the emergency power supply and is the most important parameter of the emergency power supply. The most basic function of the on-board emergency power supp...[Details]

I use GCC compiler and C++ to write programs in the project. Theoretically, as long as the external memory is enabled and configured, the address allocation of variables can be completely handed over...[Details]

0 Introduction Capacitive sensors are a type of sensor that converts the measured non-electrical quantity changes into capacitance changes. Due to its advantages of high sensitivity, low power ...[Details]

Abstract: The MAX6326 microprocessor supervisor is used in an application to provide a battery switchover circuit when the wall adapter is disconnected. The reset output drives an external MOSFET that...[Details]

Recently, Rockwell Automation issued a price increase notification letter to global distributors, stating that Rockwell Automation will implement global pricing adjustments starting December 4. ...[Details]

Both soft starter and step-down starter are devices used to start motors. They each have their own advantages and disadvantages and are suitable for different application scenarios. The following i...[Details]