T
ECHNICAL
D
ATA
S
HEET
CATEGORY:
NAME:
NO-CLEAN CORED WIRE SOLDER
209AXT
FEATURES
•
•
•
MAY BE USED IN PLACE OF NC or RMA PRODUCTS
CLEAR, HARD RESIDUES
HALIDE FREE
•
•
•
CLEANABLE WITH SAPONIFIER
TELECOMMUNICATION ACCEPTABLE
LOW-MEDIUM RESIDUES
Passes BELLCORE & IPC, product testing results available upon request
DESCRIPTION
209AXT
is a no-clean, synthetic resin-based flux core which is the same chemistry as that of AIM’s no-clean
solder pastes. 209AXT flux promotes good thermal transfer, offering better solder penetration into plated through
holes or surface mount interconnections. 209AXT cored wire produces low-to-medium post-process residues that
are electrically safe and do not require cleaning. 209AXT is operator-friendly and can be used as a drop-in for
any RMA type applications.
HANDLING
•
209AXT cored wire has an indefinite shelf life when proper storage conditions are observed.
•
Store 209AXT in a clean, dry area away from moisture and sunlight. Do not freeze this product
APPLICATION
•
•
•
•
•
Solder iron tip temperature should be between 650° - 750°F for Sn63 and Sn62 alloys, 700° - 800°F for Sn/Ag
and Sn/Ag/Cu alloys.
Hold the solder iron tip at a 45° to 60° angle to the work surface.
The solder iron should contact both the component lead and PCB pad surface.
Solder and flux should flow onto the lead and pad or lead and barrel to promote optimum flux activity for
the joint being worked.
If additional flux is needed, the use of AIM flux dispensing pens is recommended for dispensing precise
amounts of flux and eliminating over-saturation.
CLEANING
209AXT can be cleaned, if necessary, with saponified tap water or an alcohol and water blend. AIMTERGE 520
is recommended. A water temperature of 140°F is recommended, and should be adequate for removing any
post-process residues.
PACKAGING
•
•
•
•
•
•
•
209AXT is standard with a 2% flux core. Other flux core %’s are available upon request.
209AXT is available in Sn60, Sn62, Sn63, Sn96, CASTIN® and other custom alloys upon request.
Standard spool sizes: ½ lb. for .010 and .015 diameters, and 1lb. for .020, .032, .040, .050 and .062
diameters. Other diameters and spool sizes are available upon special request.
Packaging of ½ lb. and 1 lb. spools is available in 12 lb. and 24 lb. cases.
SAFETY
Use with adequate ventilation and proper personal protective equipment.
Refer to the accompanying
Material Safety Data Sheet
for any specific emergency information.
Do not dispose of any hazardous materials in non-approved containers.
Manufacturing and Distribution Worldwide
Americas +1-401-463-5605
•
Europe +44-1737-222-258
•
Asia-Pacific +852-2649-7183
•
info@aimsolder.com
•
www.aimsolder.com
P
RODUCT
T
ESTING
R
ESULTS
CATEGORY:
NAME:
NO-CLEAN CORED WIRE MEDIUM
209AXT
This Product has been tested in accordance with following specifications
TRACE LABORATORIES
Surface and Insulation Resistance - PASS
IPC
IPC
TM-650
SF-818
Minimum (1 x 10
8
) - PASSED
Minimum (1 x 10
8
) -
PASSED
96 Hours in
Ω
1.83 x 10
11
1.78 x 10
12
Copper Mirror Test –PASS Surface and Insulation Resistance - PASS
24 Hours in
Ω
Bellcore
TR-NWT-000078
2.68 x 10
11
1.47 x 10
12
IPC
Electromigration - PASS
Bellcore
Silver Chromate - PASS
Bellcore
Fluoride
Bellcore
TM-650
TR-NWT-000078
(Comb Up)
(Comb Down)
TR-TSY-000078
TR-TSY-000078
Minimum 1 x 10
8
Ω
- PASSED
96 Hours in
Ω
2.56 x 10
9
7.95 x 10
9
PASS
PASS
500 Hours in
Ω
2.35 x 10
10
1.67 x 10
10
NORTHERN TELECOM
Surface and Insulation Resistance - PASS
Electromigration - PASS
Tested on the following:
Copper Mirror Test -PASS
Trace and NT BVW
AIM PRODUCTS LABORATORY
Copper Mirror
IPC
Silver Chromate
IPC
Bellcore
Fluoride
Bellcore
Solder Ball Test
IPC
J-STD-004
J-STD-004
TR-TSY-000078
TR-TSY-000078
J-STD-004
PASS
PASS
PASS
PASS
PASS
01.22.09
Minimum-
3.8 x 10
10
Ω
Actual-
1.83 x 10
11
Ω
Taiyo PSR 4000
Enthone DSR3241
Ciba Geigy Probimer 52
Coates Imagecure AQ
The information contained herein is based on data considered accurate and is offered at no charge. No warranty is expressed or implied regarding the accuracy of this data. Liability is expressly disclaimed for
any loss or injury arising out of the use of this information or the use of any materials designated. Please review AIM’s terms and conditions at www.aimsolder.com/t&c.cfm
Manufacturing and Distribution Worldwide
Americas +1-401-463-5605
•
Europe +44-1737-222-258
•
Asia-Pacific +852-2649-7183
•
info@aimsolder.com
•
www.aimsolder.com
EE_FPGA Learning Park
京公网安备 11010802033920号
EEWORLD
