To learn more about ON Semiconductor, please visit our website at
www.onsemi.com
Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers
will need to change in order to meet ON Semiconductor’s system requirements. Since the ON Semiconductor
product management systems do not have the ability to manage part nomenclature that utilizes an underscore
(_), the underscore (_) in the Fairchild part numbers will be changed to a dash (-). This document may contain
device numbers with an underscore (_). Please check the ON Semiconductor website to verify the updated
device numbers. The most current and up-to-date ordering information can be found at
www.onsemi.com.
Please
email any questions regarding the system integration to
Fairchild_questions@onsemi.com.
ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number
of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right
to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON
Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON
Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s
technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA
Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended
or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out
of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor
is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
MMBF4391 / MMBF4392 / MMBF4393 — N-Channel Switch
January 2015
MMBF4391 / MMBF4392 / MMBF4393
N-Channel Switch
Description
G
This device is designed for low level analog switch-
ing, sample and hold circuits and chopper stabalized
amplifiers. Sourced from process 51. See J111 for
characteristics.
S
SOT-23
D
Note: Source & Drain
are interchangeable
Ordering Information
Part Number
MMBF4391
MMBF4392
MMBF4393
Top Mark
6J
6K
6G
Package
SOT-23 3L
SOT-23 3L
SOT-23 3L
Packing Method
Tape and Reel
Tape and Reel
Tape and Reel
Absolute Maximum Ratings
(1), (2)
Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be opera-
ble above the recommended operating conditions and stressing the parts to these levels is not recommended. In addi-
tion, extended exposure to stresses above the recommended operating conditions may affect device reliability. The
absolute maximum ratings are stress ratings only. Values are at T
A
= 25°C unless otherwise noted.
Symbol
V
DG
V
GS
I
GF
T
J
, T
STG
Drain-Gate Voltage
Gate-Source Voltage
Forward Gate Current
Parameter
Value
30
-30
50
-55 to 150
Unit
V
V
mA
°C
Operating and Storage Junction Temperature Range
Notes:
1. These ratings are based on a maximum junction temperature of 150°C.
2. These are steady-state limits. Fairchild Semiconductor should be consulted on applications involving pulsed or
Many companies' products are customized by antenna factories with FPC or PCB antennas with IPEX interfaces , or even bracket steel antennas. The design fee, mold fee and other fees need to be paid fro...
If JTAG cannot recognize TI's DSP, there may be the following reasons: If JTAG cannot recognize TI's DSP, there may be the following reasons:1. There is a problem with the emulator;2. There is a probl...
What is a polarized relay?
Polarized relays are relays that are activated by the combined effect of polarized magnetic field and magnetic field generated by control current passing through control coi...
Many of CNLINK's encryption chips are equipped with NVM areas. Because of its physical characteristics of not erasing when power is off and security features such as anti-brute force cracking, many us...
Selection of chip beads and chip inductorsThe function of chip beads is mainly to eliminate RF noise in transmission lines.Chip beads are composed of soft ferrite materials and form a monolithic struc...
In the AT32F403 series of Arteli microcontrollers, there is a problem with the non-flash memory start address. In order to put more APP programs in the zero-wait flash memory, the IAP program can be p...
Mobile and portable
京公网安备 11010802033920号
EEWORLD
