How To Order
790-024P Cable Receptacles
PIN CONTACTS WITH CRIMP TERMINATION
Rugged, lightweight 790-024P connectors feature machined aluminum
shells,
fl
uorosilicone face seals and wire grommets for environmental
protection. Contacts are rear-release snap-in crimp type. Connectors are
supplied with crimp contacts packaged separately. Size #23 signal pins
accept up to #22 AWG wire. Size #16 contacts accept #16-18 AWG wire.
Size #12 contacts accept #12-14 AWG wire. Size 12 and 16 cavities also
accept coaxial contacts purchased separately. Connector shell features
a groove for attachment of a low-profile EMI backshell adapter 799-015,
ordered separately.
HOW TO ORDER
Sample Part Number
790-024P
Base Part
Number
Cable Receptacle
with Pin Contacts
C-13
Shell Size -
Insert
Arrangements
See Table 1 for
Available Insert
Arrangements.
To order a connector
without size #16 or #12
power pins, substitute
“W” instead of “P” in the
insert arrangement.
Example:
36P2
is supplied with 2
power pins.
36W2
is supplied less
the power pins.
See Section B for
coaxial contacts
purchased separately.
M
Shell Finish
Electroless Nickel
general purpose
applications
P
Hardware Option
790-024P
M
Nickel-PTFE
1000 Hour Grey™
maximum corrosion
protection and durability
(non-reflective grey)
MT
Thru-Hole
No Hardware
N
Female Jackpost
P
Zinc-Nickel with Black
Chromate
tactical applications
(non-reflective black)
ZNU
Low-Profile Captivated
Jackscrew, Hex Head
L
Slot-Head Extended
Jackscrew
K
Additional shell
fi
nishes are listed on
page C-9.
Low-Profile Captivated
Screwlock, Hex Head
S
Slot-Head Extended
Captivated Screwlock
T
SPECIFICATIONS
Current Rating
Dielectric Withstanding
Voltage
Insulation Resistance
Operating Temperature
Shock
Vibration
#23 5 AMPS, #16 13 A., #12 23 A.
#23 500 VAC RMS, #12 and #16 1800
VAC RMS
5000 megohms minimum
-65° C. to +150° C.
300 g.
37 g.
Shell
Contacts
Insulators
MATERIALS AND FINISHES
Aluminum alloy
Copper alloy, 50 microinches gold
plated
Liquid crystal polymer (LCP)
Beryllium copper alloy
Flourosilicone rubber
300 series stainless steel
Retention Clips
Interfacial Seal, Grommet
Hardware
Dimensions in Inches (millimeters) are subject to change without notice.
© 2011 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC.
•
1211 AIR WAY
•
GLENDALE, CA 91201-2497
•
818-247-6000
•
FAX 818-500-9912
www.glenair.com
E-Mail: sales@glenair.com
D-1
Series 79
Cable
Connectors
790-024P
Crimp Terminated Cable Receptacle Connector,
Pin Contacts
D
790-024P
Crimp Terminated Cable Receptacle Connector,
Pin Contacts
How To Order
Table I Contact Arrangements
Contact
Quantity
Series 79
Cable
Connectors
Layout
A-5
B-2P2
B-9
C-13
D-15
D-3P3
D-7P2
E-11P2
E-19
E-7P3
5
9
19
4
3
9
13
15
3
2
2
#23 #16 #12
5
2
CROSS-SECTIONAL VIEW OF 790-024P
REAR INSULATOR
GROMMET
POTTING
WIRE (REF.)
PIN CONTACT
FRONT INSULATOR
GROOVE FOR
EMI ADAPTER
SHELL
RETAINING CLIP
INTERFACIAL SEAL
Face View
TABLE 2 HARDWARE OPTION
.190 (4.83)
MAX
F-15P2
13 2
D
F-23
F-5P5
G-33
H-10P4
23
5
33
6
4
N
No Mating Hardware
Connector is supplied with thru-holes. Shell
sizes H and L are .148" (3.76) diameter, other
shell sizes are .092" (2.34) diameter. Accepts
standard Micro-D M83513 hardware.
.155
(3.94)
MAX
P
Jackposts
Connector is supplied with removable
jackposts. Shell sizes H and L have #4-40
UNC thread, other sizes have #2-56 thread.
Stainless steel. Conforms to M83513/05.
H-29P7
22 7
H-36P2
34
H-54P2
52 2
H-5P5
H-66
66
5
2
.925
(23.50)
MAX
L
Hex Head Jackscrews
Connector is supplied with stainless steel
non-removable low profile jackscrews. Shell
sizes H and L have #4-40 UNC thread, other
sizes have #2-56 thread.
K
Extended Jackscrews
Connector is supplied with stainless steel slot
head non-removable jackscrews. Shell sizes
H and L have #4-40 UNC thread, other sizes
have #2-56 thread.
J-17P4
13 4
J-25P2
23 2
J-33
J-7P7
33
7
K-27P4
23 4
K-35P2
33 2
K-43
K-9P9
L-6P6
L-78
M-102
78
102
43
9
6
.290 (7.37)
MAX
.925
(23.50)
MAX
S
Hex Head Screwlocks
Connector is supplied with stainless steel
non-removable low profile screwlocks. Shell
sizes H and L have #4-40 UNC thread, other
sizes have #2-56 thread. Screwlocks allow
the connector to be mated before the screws
are fastened.
T
Extended Screwlocks
Connector is supplied with stainless steel
non-removable slot head screwlocks. Shell
sizes H and L have #4-40 UNC thread, other
sizes have #2-56 thread. Screwlocks allow
the connector to be mated before the screws
are fastened.
Dimensions in Inches (millimeters) are subject to change without notice.
© 2011 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC.
•
1211 AIR WAY
•
GLENDALE, CA 91201-2497
•
818-247-6000
•
FAX 818-500-9912
www.glenair.com
E-Mail: sales@glenair.com
D-2
京公网安备 11010802033920号
EEWORLD
