OJ-SS-124LMH2-WG
Parameter Name | Attribute value |
Power relay type | standard |
Terminal limit breaking current (A) | 8 |
Coil excitation system | Monostable, DC |
Coil Power Rating Class (mW) | 150 – 200 |
Coil Power Rating (DC) (mW) | 200 |
Coil resistance (Ω) | 2880 |
Coil characteristics | UL Coil Insulation Class B, Sensitive Version |
Coil Voltage Rating (VDC) | 24 |
Terminal switch load (minimum) | 100mA @ 5V |
Terminal switching voltage (max) (VAC) | 277 |
Terminal switching voltage (max) (VDC) | 30 |
Terminal Voltage Rating (VAC) | 250 |
Terminal Voltage Rating (VDC) | 30 |
Insulation leakage between terminal and coil | 9.4 mm [ .37 in ] |
Initial dielectric between terminal and coil (Vrms) | 4000 |
Insulation leakage type (mm) | 5.5 – 8 |
Terminal limit continuous current (A) | 8 |
Terminal limit short-time current (A) | 8 |
Terminal limit closing current (A) | 8 |
Open terminal insulation initial dielectric (Vrms) | 750 |
Coil/terminal insulation initial dielectric type (V) | 3500 – 4000 |
product weight | 9 g [ .318 oz ] |
Insulating properties | Tracking index of relay base PTI250 |
Terminal arrangement | 1 Form A (NO) |
Terminal current type (A) | 5 – 10, 16 |
Contact Current Rating (Max) (A) | 8 |
Terminal material | AgSnO |
Number of terminal poles | 1 |
Terminal type | PCB-THT |
Relay installation type | A printed circuit board |
Product height | 14.7 mm [ .579 in ] |
Product length | 18.2 mm [ .717 in ] |
Product width | 10.2 mm [ .4 in ] |
Width type (mechanical) (mm) | 10 – 12 |
Insulation gap between terminal and coil | 7.7 mm [ .303 in ] |
Height type (mechanical) (mm) | 14 – 15 |
Insulation gap type (mm) | 2.5 – 4 |
Length type (mechanical) (mm) | 16 – 20 |
Environmental Protection Category | RTII |
Ambient temperature (maximum) | 85 °C [ 185 °F ] |
Ambient temperature category (°C) | 70 – 85 |
Encapsulation method | Tray, boxes and trays |