27P MOD1 UNSHROUDED HEADER, ST, 0.4 Au
Parameter Name | Attribute value |
PCB Connector Component Types | PCB mounting header |
Sealable | no |
Connectors and terminals terminate to | A printed circuit board |
Connector type | separation |
sealing ring | Without |
plate support | Without |
Connector terminal load status | Fully loaded |
PCB mounting direction | vertical |
Number of Positions | 27 |
Rows | 1 |
keying | no |
Terminal base material | brass |
PCB terminal termination area plating materials | tin |
Terminal base material | nickel |
Terminal protection | Without |
Terminal type | Pin |
Terminal contact plating material | gold |
PCB Termination Methods | Through hole |
Termination cylinder length | 3.4 mm [ .134 in ] |
Terminal termination type | Through hole |
Terminal plating materials | Nickel base tin plating |
Terminal plating thickness (µm) | 2.5 – 5 |
PCB installation and fixation | Without |
PCB installation method | Through hole |
Centerline (Pitch) | 3.96 mm [ .156 in ] |
Shell material | PBT GF |
Shell color | green |
Joint post length | 14.2 mm [ .559 in ] |
High temperature compatible | no |
Applicable to | Match female end |
approved standards | CSA LE7189, UL E28476 |
UL flammability rating | UL 94V-0 |