Features
•
Up to 150mW CW
output power.
•
High Quality, Reli-
ability, and Perform-
ance
Product Specifications
830nm Single-Mode Laser Diodes (50-150mW)
Description:
High brightness, high quality, and high reliability are the foundation of our single mode prod-
uct line. Axcel’s 830nm single mode laser diodes are available with up to 150mW of continu-
ous output power from a single emitter chip. Axcel’s trademark laser chip design offers un-
measurable degradation and long lifetimes that make our chips among the most reliable in
the industry today. Our 830nm single mode line serves a broad range of applications includ-
ing Sanyo replacement, gaming, printing, laser ranging, spectral analysis, and graphics.
Packaging options include a 9mm TO-can or chip on sub-mount package. More options are
available upon request. Please view our website for mechanical drawings of all of our sub-
mounts.
Applications
•
Sanyo Replacement
•
Spectral Analysis
•
Graphics
•
Printing
•
Laser Ranging
•
Gaming
Standard Product Specifications for 830nm Single-mode Diodes
50mW Series
Parameter
Wavelength
Spectrum FWHM
Operating Power (P
o
)
Operating Current (I
o
)
Operating Voltage (V
o
)
Kink-Free Power
Lifetime
Vertical Far Field
Parallel Far Field
Threshold (I
th
)
Slope Efficiency (dP/dI)
Storage Temperature
Operating Temperature (T
op
)
Lead Soldering Temperature (5 sec)
Note:
Unit
nm
nm
mW
mA
V
mW
hour
deg, FWHM
deg, FWHM
mA
W/A
o
C
o
C
o
C
100mW Series
Max
835
2.0
-
100
2.2
-
-
23
10
40
-
80
50
250
Min
825
-
-
-
-
110
100,000
-
-
-
0.9
-40
-20
-
Typ
830
0.5
100
120
1.9
-
-
18
8
20
1.0
-
25
-
80
50
250
Max
835
2.0
-
170
2.2
-
-
23
10
40
150mW Series
Min
825
-
-
-
-
160
100,000
-
-
-
0.9
-40
-20
-
Typ
830
0.5
150
170
1.9
-
-
18
8
20
1.0
-
25
-
Max
835
2.0
-
220
2.2
-
-
23
10
40
-
80
50
250
Min
825
Typ
830
0.5
-
-
-
60
100,000
-
-
-
0.9
-40
-20
-
50
70
1.9
-
-
18
8
20
1.0
-
25
-
1) Specifications are subject to change without notice.
2) All Axcel Photonics products are TE polarized
Germany and other countries: LASER COMPONENTS GmbH, Phone: +49 8142 2864 0, Fax: +49 8142 2864 11, info@lasercomponents.com
Great Britain: LASER COMPONENTS (UK) Ltd., Phone: +44 1245 491 499, Fax: +44 1245 491 801, info@lasercomponents.co.uk
France: LASER COMPONENTS S.A.S., Phone: +33 1 3959 5225, Fax: +33 1 3959 5350, info@lasercomponents.fr
830nm Single Mode Performance Data Graphs
Determining Your Product number:
MM—WWW—PPPP—XYZ—(custom add-ons)
(package)-(wavelength)-(power)-(options)
Standard Product
Configurations
50mW Series
C2-830-0050-S50
M5-830-0050-S50
M5-830-0050-S5D
M5-830-0050-D5P
M9-830-0050-S50
M9-830-0050-S5D
M9-830-0050-D5P
100mW Series
C2-830-0100-S50
M5-830-0100-S50
M5-830-0100-S5D
M5-830-0100-D5P
M9-830-0100-S50
M9-830-0100-S5D
M9-830-0100-D5P
150mW Series
C2-830-0150-S50
M5-830-0150-S50
M5-830-0150-S5D
M5-830-0150-D5P
M9-830-0150-S50
M9-830-0150-S5D
Package:
C2
M5
M9
Wavelength:
830
Power Options:
0050
0100
0150
Safety
X Option (aperture size)
2.1mm COS
5.6mm TO-can
9mm TO-can
830nm
50mW
100mW
150mW
S
D
5
0
D
P
single-mode (cathode ground)
single-mode (anode ground)
±5nm
none
w/photodiode (anode ground)
w/ photodiode (cathode ground)
Y Option (wavelength tolerance)
Z Option (additional options)
Please note: These are our standard product configurations.
ESD Caution
Caution: Laser light emitted from any diode laser is invisible and may be harmful to the human
eye. Avoid looking directly into the diode laser aperture when the device is in operation.
Note:
The use of optical instruments with this product will increase eye hazard.
Operating Considerations
Always handle diode lasers with extreme care to prevent electrostatic discharge, the primary
cause of unexpected diode failure. You can prevent ESD by always wearing wrist straps,
grounding all applicable work surfaces, and following extremely rigorous anti-static
Operating the diode laser outside of its maximum ratings may cause device failure or a safety hazard. Power supplies used with the component must be employed such that the maximum peak
optical power cannot be exceeded. CW diode lasers may be damaged by excessive drive current or switching transients. When using power supplies, the diode laser should be connected with
the main power on and the output voltage at zero. The current should be increased slowly while monitoring the diode laser output power and the drive current. Device degradation accelerates
with increased temperature, and therefore careful attention to minimize the case temperature is advised. A proper heat-sink for the diode laser on a thermal radiator will greatly enhance
laser life.
Power Output Danger Label
WARNING! Invisible laser radiation is emitted from devices as shown below
21 CFR 1040.10 Compliance
Because of the small size of these devices, each of
the labels shown are attached to the individual
shipping container. They are illustrated here to
comply with 21 CFR 1040.10 as applicable under
the Radiation Control for Health and Safety Act of
1968.
www.lasercomponents.com
01/11 / V4 /axcel/sm/830nm-sm-laser-diode.pdf
Germany and other countries: LASER COMPONENTS GmbH, Phone: +49 8142 2864 0, Fax: +49 8142 2864 11, info@lasercomponents.com
Great Britain: LASER COMPONENTS (UK) Ltd., Phone: +44 1245 491 499, Fax: +44 1245 491 801, info@lasercomponents.co.uk
France: LASER COMPONENTS S.A.S., Phone: +33 1 3959 5225, Fax: +33 1 3959 5350, info@lasercomponents.fr
京公网安备 11010802033920号
EEWORLD
