To learn more about ON Semiconductor, please visit our website at
www.onsemi.com
Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers
will need to change in order to meet ON Semiconductor’s system requirements. Since the ON Semiconductor
product management systems do not have the ability to manage part nomenclature that utilizes an underscore
(_), the underscore (_) in the Fairchild part numbers will be changed to a dash (-). This document may contain
device numbers with an underscore (_). Please check the ON Semiconductor website to verify the updated
device numbers. The most current and up-to-date ordering information can be found at
www.onsemi.com.
Please
email any questions regarding the system integration to
Fairchild_questions@onsemi.com.
ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number
of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right
to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON
Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON
Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s
technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA
Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended
or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out
of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor
is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
HCPL0700, HCPL0701, HCPL0730, HCPL0731 — Low Input Current High Gain Split Darlington Optocouplers
April 2009
HCPL0700, HCPL0701, HCPL0730, HCPL0731
Low Input Current High Gain Split Darlington Optocouplers
Single Channel: HCPL0700, HCPL0701, Dual Channel: HCPL0730, HCPL0731
Features
■
Low input current: 0.5mA
■
Superior CTR: 2000%
■
Superior CMR – 10 kV/µs
■
CTR guaranteed 0°C to 70°C
■
U.L. Recognized (file# E90700)
■
VDE 0884 recognized (file# 136616)
Description
The HCPL0700, HCPL0701, HCPL0730 and HCPL0731
optocouplers consist of an AlGaAs LED optically coupled
to a high gain split darlington photodetector housed in a
compact 8-pin small outline package. The HCPL0730
and HCPL0731 devices have two channels per package
for optimum mounting density.
The split darlington configuration separating the input
photodiode and the first stage gain from the output tran-
sistor permits lower output saturation voltage and higher
speed operation than possible with conventional darling-
ton phototransistor optocoupler.
The combination of a very low input current of 0.5mA
and a high current transfer ratio of 2000% makes this
family particularly useful for input interface to MOS,
CMOS, LSTTL and EIA RS232C, while output compati-
bility is ensured to CMOS as well as high fan-out TTL
[b]Chapter 17 Thread Management[/b][b]17.1 Basic Concepts of Threads[/b] Threads are the essence of RTOS. From embedded OS to desktop server OS, Linux/Windows, etc. all have the concept of threads. Th...
Live playback: The most important component of the analog world - Signal chain and power supply: Amplifier special session : https://training.eeworld.com.cn/course/27386...
Why is the gain in the following question not output/input?
question:
For a circuit in a linear amplifier, when the input voltage is 15mV, the output voltage is 6V, and when the input voltage is 30mV,...
If the project uses the expansion pins on the development board, such as the I/O in the Arduino or Raspberry Pi interface, then you need to constrain the corresponding pins in the project. One is to e...
Compared with the F1 chip, the F4 RTC has been greatly improved. The F4 RTC provides a calendar clock and two programmable alarm interrupts, and a periodic programmable wake-up flag. This makes it ve...[Details]
Market performance has proven that
the MX150 sealed connector series has demonstrated excellent reliability in a variety of harsh applications. Whether in extreme temperatures and various vibra...[Details]
A new vivo phone, model V1730GA, has been successfully connected to the network. In terms of appearance, this new vivo model V1730GA uses a 6.26-inch TFT screen with a resolution of 2280×1080, dime...[Details]
Function of the circuit
In logic circuits, it is sometimes necessary to observe multiple signals at the same time. It is certainly convenient to use a logic display, but th...[Details]
introduction Entering the 21st century, the status of information is becoming increasingly important, and the ability to obtain and process information has become a key issue in modern inform...[Details]
The photoelectric controller uses the 555 time-base integrated circuit as the core, has a relatively simple control method, is reliable to use, and has a long life. It is a low-priced, small-sized,...[Details]
Introduction
The DS2786 open-circuit voltage (OCV) fuel gauge is shipped with default OCV characteristics and default configuration loaded into the EEPROM. To improve the accuracy of the OC...[Details]
Infrared remote control is widely used, and encoding and recognition are often the most headaches for microcontroller beginners. In fact, infrared encoding and recognition are not difficult. The ...[Details]
0 Introduction
As the global energy crisis continues to deepen, oil resources are becoming increasingly depleted, and the harm of air pollution and global temperature rise is increasing, governments...[Details]
This series of tutorials takes AVR microcontroller as the object and introduces the rapid development method of microcontroller. Reference textbook: "Microcontroller Technology and Application Proj...[Details]
1. Introduction
The goal of
every HB
LED
manufacturer is to get more light output for less money. Faced with strong competition and numerous technical barriers, it is crucial t...[Details]
Whether your car is an internal combustion engine (ICE), a hybrid electric vehicle (HEV) or an electric vehicle (EV), is it possible to use it as a primary energy source to provide alternating curren...[Details]
Help OEM manufacturers achieve simple, fast and secure IoT implementation and deployment August 10, 2023, Beijing, China - Avnet launched the second IoTConnect platform based on Amazon Cloud Techno...[Details]
According to a report by foreign media Futurecar on November 11, researchers at Pennsylvania State University have discovered a new technology that can fully charge electric vehicle batteries in 1...[Details]
On the morning of October 26, Wei County held a groundbreaking ceremony for the Qingyun Fengda New Energy Storage Project. Cui Yaopeng, secretary of the county party committee, attended and delivered ...[Details]