Circuit Protector Elements
UNH0104
(UN11004)
Circuit Protector Elements
Unit: mm
For overcurrent protection
(0.4)
(1.5)
6.9
±0.1
(1.5)
2.5
±0.1
(1.0)
3.5
±0.1
0.5 max.
■
Absolute Maximum Ratings
T
a
=
25°C
Parameter
Operating ambient temperature
Storage temperature
Symbol
T
opr
T
stg
Rating
−55
to
+125
−55
to
+125
Unit
°C
°C
1
1.0
±0.1
(0.85)
2.4
±0.2
0.45
±0.05
2
(5.0)
3
1.25
±0.05
0.55
±0.1
1: For use
2: N.C.
3: For use
M-B1 Package
■
Electrical Characteristics
T
a
=
25°C
±
3°C
Parameter
Rated voltage
Rated current
Internal resistance
Cutoff current
Standard temperature rise
135
Min
Typ
50
0.4
180
225
Max
Unit
V
A
mΩ
°C
Cutoff time (s)
100
10
Refer to the diagram
5
1
0.1
■
Usage Notes
0.01
0.1
1
10
100
Cutoff current (A)
•
Package shall be overheated and dangerous for overcurrent.
•
This device should be used only to the secondary circuit.
Package will be damaged for added overpower.
•
This device is not electrical fuse legally. Please draw a clear line between electrical fuse from this device.
Note) The part number in the parenthesis shows conventional part number.
Publication date: June 2002
SQB00015AED
4.1
±0.2
•
Sharp cutoff characteristics and low voltage drop
•
Flame retardant package and low heat generation.
•
The package is molded with high dimensional accuracy.
R 0.9
R 0.7
2.0
±0.2
4.5
±0.1
■
Features
(1.0)
1
Request for your special attention and precautions in using the technical information
and semiconductors described in this book
(1) An export permit needs to be obtained from the competent authorities of the Japanese Govern-
ment if any of the products or technologies described in this book and controlled under the "Foreign
Exchange and Foreign Trade Law" is to be exported or taken out of Japan.
(2) The technical information described in this book is limited to showing representative characteristics
and applied circuits examples of the products. It neither warrants non-infringement of intellectual
property right or any other rights owned by our company or a third party, nor grants any license.
(3) We are not liable for the infringement of rights owned by a third party arising out of the use of the
product or technologies as described in this book.
(4) The products described in this book are intended to be used for standard applications or general
electronic equipment (such as office equipment, communications equipment, measuring instru-
ments and household appliances).
Consult our sales staff in advance for information on the following applications:
•
Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment,
combustion equipment, life support systems and safety devices) in which exceptional quality and
reliability are required, or if the failure or malfunction of the products may directly jeopardize life or
harm the human body.
•
Any applications other than the standard applications intended.
(5) The products and product specifications described in this book are subject to change without no-
tice for modification and/or improvement. At the final stage of your design, purchasing, or use of the
products, therefore, ask for the most up-to-date Product Standards in advance to make sure that
the latest specifications satisfy your requirements.
(6) When designing your equipment, comply with the guaranteed values, in particular those of maximum
rating, the range of operating power supply voltage, and heat radiation characteristics. Otherwise,
we will not be liable for any defect which may arise later in your equipment.
Even when the products are used within the guaranteed values, take into the consideration of
incidence of break down and failure mode, possible to occur to semiconductor products. Measures
on the systems such as redundant design, arresting the spread of fire or preventing glitch are
recommended in order to prevent physical injury, fire, social damages, for example, by using the
products.
(7) When using products for which damp-proof packing is required, observe the conditions (including
shelf life and amount of time let standing of unsealed items) agreed upon when specification sheets
are individually exchanged.
(8) This book may be not reprinted or reproduced whether wholly or partially, without the prior written
permission of Matsushita Electric Industrial Co., Ltd.
2002 MAY