To prevent damage to the components conformal coating, the leads should be adequately supported during the
forming process
H4P
Body Length (L) maximum:
Body Diameter (D) maximum:
Lead Diameter (d) maximum:
Lead Length (l) nominal:
Recommended Mounting Pitch:
Weight (g/100 resistors)
10.0 mm
3.70 mm
0.60 mm
30.0 mm
12.7 mm
40
H4
10.0 mm
3.70 mm
0.60 mm
30.0 mm
12.7 mm
40
H8
7.20 mm
2.50 mm
0.60 mm
30.0 mm
10.2 mm
24
Characteristics -
Long Term Stability
Long Term Stability
BS CECC 40101 004
Ratings at 70°C
H4 - 0.25 W
H8 - 0.125 W
Long Term Stability
BS CECC 40101 030
Ratings at 125°C
H4 - 0.125 W
H8 - 0.1 W
Long Term Stability
Commercial
Ratings at 125°C
H4P - 1W
H4 - 0.5 W
H8 - 0.25 W
Damp Heat Steady State
93% RH at 40°C
1773230 CIS BI 06/2011
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
For email, phone or live chat, go to:
te.com/help
Axial Leaded Precision Resistors
Type HOLCO Series
Derating Graph -
Approved and Commercial Ratings
How to Order
H8
Common Part
H4P
H4
H8
100R
Resistance Value
1.0 ohm
(1000 milli ohms) 1R0
10 ohm
(10 ohms) 10R
100 ohm
(100 ohms) 100R
1K 0hm
(1000 ohms) 1K0
10K ohm
(10000 ohms) 10K
100K ohm
(100000 ohms) 100K
1M ohm
(1000000 ohms) 1M0
B
Tolerance
A - 0.05%
Y
T.C.R. Code
A - 5ppm
B - 10ppm
B
Release
A - Part can only
be sold with
Commercial or
C of C release.
B - Part can be
sold to BS CECC
40101 004,
BS CECC 40101
030
D - Part can
be sold to
BS CECC 40101
804
B - 0.1%
Y - 15ppm
C - 0.25%
D - 25ppm
D - 0.5%
C - 50ppm
F - 1.0%
Z - 100ppm
TE Connectivity, TE connectivity (logo) and TE (logo) are trademarks.
Other logos, product and Company names mentioned herein may be trademarks of their respective owners.
While TE has made every reasonable effort to ensure the accuracy of the information in this datasheet, TE does not guarantee that it is error-free, nor does TE make any other
representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves the right to make any adjustments to the information contained herein
at any time without notice. TE expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantabili-
ty or fitness for a particular purpose. The dimensions in this datasheet are for reference purposes only and are subject to change without notice. Specifications are subject to change
without notice. Consult TE for the latest dimensions and design specifications.
[i=s]This post was last edited by qwqwqw2088 on 2020-2-11 09:25[/i]1. How to find the right chip reference design and application guide?
Search the chip model on TI's official website and you will be ...
TGF4042 has the function of a noise generator. The manual states that its noise bandwidth is 62.5MHZSet the function generator to noise mode and set it to 200mvPP
Observe the noise and spectrum... Usi...
[i=s]This post was last edited by bqgup on 2020-1-27 10:39[/i]The Internet of Things is very popular nowadays, so let’s get two ESP8266WiFi modules to experience the fun of network control.
one,I use ...
Everyone, can the baud rate reach 1M and the transmission distance reach 30M? Can it be achieved in servo products? Is it just laboratory data? Please learn from some experience. Thank you...
This special-shaped pad contains multiple pins. When I directly make it into a style guide netlist of the special-shaped pad, it cannot match multiple pins. If I try to overlap the pad and the special...
Wireless Connectivity
京公网安备 11010802033920号
EEWORLD
