FEATURES / BENEFITS
Uniform non-pixelated appearance
UNIFORM
APPEARANCE
LED
ARROWS
Expanded view radiation pattern meets
ITE VTCSH-3 LED Arrow Specification
ENERGY STAR
®
qualified
90% reduction in power vs. incandescent
Long life; Up to 10 times longer than incandescent
Fuse and transient suppressor incorporated for
superior line and load protection
Convex tinted lens reduces glare and sun reflection
Hard coated lenses for abrasion resistance
Easy to install into existing signal enclosure
SPECIFICATIONS
Operating Voltage Range:
80VAC to 135VAC (120VAC nominal)
Operating Temperature Range: -40°C to +74°C
Turn-on / Turn-off Time < 75 msec
Power Factor > 0.9
Total Harmonic Distortion < 20%
Meets FCC Title 47, Subpart B, Section 15
regulations for electrical noise
Failed State Impedance > 250K ohm within 300ms
Conforms to MIL-STD-810F for blowing rain
Conforms to MIL-STD-883, Test Method 2007,
for mechanical vibration
Conforms to MIL-STD-883, Test Method 1010,
temperature cycling requirements
Provided with quick connect terminals and spade adapters
Written manufacturer’s warranty available on request
All products traceable by serial number
Dialight Corporation
1501 Route 34 South • Farmingdale, NJ 07727 USA
Tel: (1) 732-919-3119 • Fax: (1) 732-751-5778 • www.dialight.com
Luminance Uniformity and Color Uniformity exceed
ITE VTCSH-3 LED Arrow Specification requirements
Transient suppression exceeds ITE VTCSH-3
LED Arrow Specification requirements and meets the
following standards:
NEMA TS-2 Sec. 2.1.6 and Sec. 2.1.8
EC 1000-4-5, 3KV, 2 ohm source impedance
ANSI/IEEE C62, 41-2002; IEC 61000-4-12,
6KV, 200A, 100KHz ring wave
Power supply is conformally coated for robust operation
MDTSARWEXCAL001_A