: .......................................................................16 detents with 2.5 Ncm (+/- 30%) or no detents
Outer shaft
1
:......................................................................32, 16 or no detents
For 32 detents: 0.5, 1.0 or 2.0 Ncm (+/- 30%)
For 16 detents: 1.5 or 2.5 Ncm (+/- 30%)
Rotational life:
2
..................................................................1,000,000 revolutions min. with 0.5, 1.0 or 1.5 Ncm switching torque or with no detents
500,000 revolutions min. with 2.0 Ncm switching torque
300,000 revolutions min. with 2.5 Ncm switching torque
Residual switching torque (end of life): ................................90% typ.
Shaft strength: ...................................................................100 N min. push, 100 N min. pull, 50 Ncm min. bending
Fastening torque of nut: .....................................................100 Ncm max.
Shock: ...............................................................................100 G max. (MIL-STD-202G, method 213B, condition C)
Flammability:.....................................................................UL94-V0 (IP65/IP68: O-rings and non-threaded bushing gasket are UL94-HB)
Packaging Sizes
Tray: .................................................................................20 pcs. (nuts are supplied and packed separately)
Additional Data for Push Button Switch
Mechanical Data
Push button actuation force (new condition): ........................6 N (+/- 30%)
Push button switch travel: ...................................................0.5 (+/- 0.2) mm
Push button switch life:
2
......................................................200,000 actuations min.
Residual push button actuation force (end of life): ................90% typ.
Electrical Data
Contact bouncing time: ......................................................2 ms max.
Dielectric withstanding voltage to housing/shaft:..................500 VDC during 60 seconds (MIL-STD-202G, method 301)
1. Introduction to the onboard serial port of the GD32L233C-START evaluation boardThe specific chip model used in the GD32L233C-START evaluation board is GD32L233CCT6, which supports 2-way UART, full-...
China's first field trial of near-field communication mobile payment launched 2006-7-10Among the emerging mobile applications, mobile payment is a popular item among users. According to a survey condu...
1) Classification by purpose: Automobiles can be divided into sedans, buses, trucks, off-road vehicles, special-purpose vehicles, etc. (2) Classification by power type: Automobiles can be divided into...
When I used the simulator to connect to DSP C5509A in CCS environment to debug an RTC program, I found that the output window did not output time information regularly. I thought it was a problem with...
The native USB port on ESP32-S2-Saola-1 is not connected to the USB, but only to the pin header. Although it can be used every time with Dupont wire, it is easy to have poor contact, so I want to modi...
If I connect any two I/O pins directly without a buffer in between, is there any delay? The delay of connecting one inverter in between and connecting three inverters should be 3 times different. Why ...
Siemens S7-1200 can perform Modbus RTU communication through communication boards and communication modules. PLC is used as a controller and is generally used as a Modbus master. When used as a Mod...[Details]
The emergence of smart computing devices is partly due to the introduction of Bluetooth Low Energy technology. This new technology allows devices to communicate with each other without the high energ...[Details]
When we play racing games on the computer, the player's perspective is usually above or behind the car, so we can see the surrounding environment of the car. This perspective can help us understand t...[Details]
1. Schmitt trigger for waveform transformation
Using
the positive feedback effect in the state transition process of
the Schmitt trigger
, a periodic signal with slow edge cha...[Details]
At the Samsung Unpacked conference earlier this month, Samsung also launched two charging devices, namely the Wireless Charger Trio that can wirelessly charge three devices at the same time and the 2...[Details]
Impact of SARS on the manufacturing and automotive industries in 2003 According to the progress of SARS in 2003, the coronavirus was controlled under natural conditio...[Details]
Flow formula of target flow meter The selection of target flowmeter must be calculated to convert the actual flow rate into the flow rate of an equivalent amount of standard water, and then selec...[Details]
Conducted test items for WLAN AP.
The test environment is shown in the figure below. The PC controls APUT through the Ethernet port. The WLAN base station is only used for APUT communication and ...[Details]
This time we will introduce representative noise suppression components. The first is chip ferrite beads, which are ferrite bead inductors processed into an SMD (surface mount device) shape.
Fer...[Details]
Any oscilloscope has limited memory, so all oscilloscopes must use triggers. A trigger is an event of interest that the oscilloscope should find. In other words, it is something that the user wants t...[Details]
O Introduction
Low-voltage and low-power inverter power supplies have been widely used in industrial and civilian fields. In particular, the development and utilization of new energy source...[Details]
1. How to measure resistance using an analog multimeter The resistance measurement circuit of the analog multimeter is shown in the figure below. Before measuring the resistance Rx, please short-ci...[Details]
A single-chip audio system solution based on the MAX97001
The MAX97001 mono audio subsystem combines a mono speaker amplifier with a stereo headphone amplifier and an analog DPST switc...[Details]
Today, we have a certain understanding of the microcontroller keys. Microcontrollers are divided into stand-alone keyboards and matrix keyboards. The stand-alone type occupies more IO port resources a...[Details]
Figure 3+1 protection circuit
According to the requirements of relevant departments of our country, as shown in Figure 1, Class C lightning arresters have been installed on communicati...[Details]
GD32 MCU
京公网安备 11010802033920号
EEWORLD
