EB7S
Vishay Dale
Edgeboard Connectors, Single Readout
FEATURES
• 0.156" [3.96mm] C-C.
• Bifurcated bellows contacts provide 2 flexing contact surfaces
to assure positive contact under adverse conditions such as
vibration or PC board irregularities.
• Accepts PC board thickness of 0.054" - 0.071"
[1.37mm - 1.80mm].
• Polarization between contact positions in all sizes.
Between contact polarization permits polarizing without loss
of a contact position.
• Selective gold plating.
• Polarizing key is reinforced nylon, may be inserted by hand,
requires no adhesive.
• Protected entry, provided by recessed leading edge of
contact, permits the card slot to straighten and align the board
before electrical contact is made. Prevents damage to
contact which might be caused by warped or out of tolerance
boards.
•
Recognized under the Component Program of
Underwriters Laboratories, Inc. Listed under File E65524,
Project 77CH3889.
ELECTRICAL SPECIFICATIONS
Current Rating:
5 amps.
Test Voltage Between Contacts:
At sea level: 1800VRMS.
At 70,000 feet [21,336 meters]: 450VRMS.
Insulation Resistance:
5000 Megohm minimum at 500VDC
potential.
Contact Resistance:
30 millivolts maximum at rated current
(with gold plating).
Operating Temperature:
- 55°C to + 125°C.
Humidity:
96 hours at 90% relative humidity at + 40°C, dried
at room temperature for 3 hours minimum, insulation
resistance 5000 Megohm.
Durability:
(With gold plating.) After 500 cycles of insertion
and withdrawal of 0.070" [1.78mm] thick steel test gauge,
contact resistance less than 0.030V at 5 amps and individual
contact retention force when measured with a 0.054" [1.37mm]
thick steel test slug greater than 1/2 ounce.
Shock:
Three 50g shocks in each of 3 mutually perpendicular
planes with no loss of continuity.
Vibration:
2 hours in each of 3 mutually perpendicular
planes, frequency sweep 10 to 55cps at 0.06 double amplitude
with no loss of continuity.
APPLICATIONS
For use with 0.062" [1.57mm] printed circuit boards requiring
an edgeboard type connector on 0.156" [3.96mm] centers.
MATERIAL SPECIFICATIONS
Body:
(Standard) Glass-filled phenolic per MIL-M-14, dark
green, flame retardant (UL 94V-0).
(Optional - See Ordering Information):
“1” glass-filled diallyl phthalate per MIL-M-14, Type SDG-F
green, flame retardant (UL 94V-0).
“3” thermoplastic polyester, glass-filled, black, flame retardant
(UL 94V-0).
Contacts:
Phosphor bronze.
Polarizing Key:
Glass reinforced nylon, flame retardant
(UL94H-B).
Contact Plating:
Gold (See Ordering Information).
NOTE:
High temperature burn-in, edgeboard connectors,
0.156" [3.96mm] center to center are on page 20 of this catalog.
PHYSICAL SPECIFICATIONS
Contact Type:
Bifurcated bellows.
Number of Contacts:
6, 10, 12, 15, 18 and 22 per side.
Contact Spacing:
0.156" [3.96mm] center to center.
Card Thickness:
0.054" to 0.071" [1.37mm to 1.80mm].
Card Slot Depth:
Single Readout = 0.300" [7.62mm].
ORDERING INFORMATION
EB7
MODEL
1
BODY MATERIAL
Optional Body
Material
1 = Diallyl
Phthalate
3 = Glass-filled
Polyester
Omit for
standard
phenolic.
S
SINGLE
READOUT
A
22
STANDARD TERMINAL CONTACTS
VARIATIONS
A or B
6, 10,
12,
15, 18
or 22
X
A
MOUNTING POLARIZING
VARIATIONS
KEY
POSITIONS
SG = Selective Gold Plating
(0.00003"
[0.000762mm]
Key(s) are
minimum thick) on contact area
located to
with Gold Flash on terminal.
right
of
SGF = Selective Gold Plating
position(s)
(0.00001"
[0.000254mm]
designated.
minimum thick) on contact area
Required
with Gold Flash on terminal.
only when
All Gold Plating over 0.00005"
polarizing
[0.00127mm] minimum Nickel
keys are to
Underplate.
be factory
Contact factory for additional
installed.
plating options.
www.vishay.com
11
SG
CONTACT
PLATING
Document Number 36004
Revision 14-Aug-02
For technical questions, contact Connectors@vishay.com
Wireless Connectivity
京公网安备 11010802033920号
EEWORLD
