C&K Connector Specification CS FR022, amendment to the ESCC Generic Specification n° 3401, for low cost products manufactured :
- in the same ESA qualified site
- through the same manufacturing and control processes
- with the same piece parts
- with lighter controls, documentation and traceability
Applications : Engineering models, ground equipments, testing, some flight equipments (no need for high requirements).
The connectors and accessories, supplied according to these 2 quality levels, are totally compatible, interchangeable, and intermateable, as they are
manufactured with the same piece parts (except the cables), in the same ESA qualified site.
Connector Styles
Description of the 3 Connector Styles proposed for the Space applications (Combinations of Configurations and Quality Levels).
Connector Style
Space ESA
Space FR022
Standard FR022
Configuration
ESA
ESA
Standard
Quality Level
ESA
FR022
FR022
Configuration characteristics.
Accessories
Cavity filled with epoxy
Guide Posts
Polarization key
Latching (even number of cavities)
Latching (odd number of cavities)
Configuration ESA
1 & N (mandatory)
2 & N-1 (mandatory)
3 to N-2 (option)
N/2 (option)
N/2 – 1 (option)
Configuration Standard
N.A.
1 & N (option)
1 to N (option)
N/2 (option)
N/2 – 1 (option)
Dimensions are shown in mm (inch)
Dimensions subject to change
137
Microminiature Connectors Type MTB1 Space
Performance Specifications
Operating Temperature range
Storage Temperature range
Working Voltage
(between contacts and contact and shell)
Rated Current
Insulation Resistance (500 V DC)
Voltage Proof
Contact Retention in insert
Engagement / Separation Forces
(Male Contacts)
-55°C / +125°C (-67°F / +257°F)
-55°C / +125°C (-67°F / +257°F)
Sea level
150 Vrms
33000 m (108240 feet) altitude
100 Vrms
AWG 26 Wire
2,5 A max.
AWG 28 Wire
1,5 A max.
Solid uninsulated Wire
2,5 A max.
5000 M
min.
600 Vrms / 2.0 mA max. leakage current
22,25 N max. / No contact axial displacement allowed
Gauge Fixture
Max.
Min.
Separation Force (N min.)
Inner diameter
min. / max.
0,559 (.0220) / 0,564 (.0222)
0,582 (.0229) / 0,587 (.0231)
0,137
Engagement Force (N max.)
1,667
Mating / Unmating Forces (per contact)
Mechanical Endurance
Contact Resistance
Mating : 2.2 N max.
Unmating : 0.14 N min. / 2.2 N max.
500 cycles mating/unmating
Low level current (10 mA / 20 mV DC) : 6.0 m
Rated current : 5.0 m max.
Nb of Contacts per Connector
2 to 4
5 to 14
15 and over
max.
AWG 26 Wire
2,0 A max.
1,8 A max.
1,4 A max.
AWG 28 Wire
1,4 A max.
1,2 A max.
0,9 A max.
Maximum Rated Current
Solid uninsulated Wire
2,0 A max.
1,8 A max.
1,4 A max.
Maximum Weight
Male Contact
Female contact
Plug Insulator
Receptacle Insulator
Guide Posts (pair)
Latching Plug part
Latching Receptacle part
Solid Uninsulated Wire
Insulated Cable AWG26 (ESCC 390101302B)
Insulated Cable AWG28 (ESCC 390101301B)
20000 Gamma max. (NM)
0.020 g
0.020 g
0.021 g / cavity
0.006 g / cavity
0.035 g
0.030 g
0.040 g
1.60 g / m
2.30 g / m
1.80 g / m
Residual Magnetism Level
Dimensions are shown in mm (inch)
Dimensions subject to change
138
Microminiature Connectors Type MTB1 Space
Contact Design
Welded tip
Sleeve
Wire
Crimp area
Wire crimp
The high-performance and reliable contact characteristics are obtained by the Micropin
TM
contact system.
The flexible "twist-pin" spring contact consists of 7 strands of 0,127 (.005) diameter beryllium copper wire helically wound around a core of 3 strands
0,09 (.0035) diameter soft copper wire.
This wire bundle is crimped into a sleeve at one end. The other end is terminated with a hemispherically shaped weld.
The wire bundle is compressed to create a bulge with a diameter slightly larger than the socket inside diameter.
The pin elongates and twists when it enters the socket. Electrical contact is maintained along 7 spiral lines.
The socket is a precision-made tube with a chamfered lead-in.
Normal mating conditions
Severe misalignment
Twist-pin contacts will mate even under severe misalignment.
The flexible twist-pin is recessed into the insulator and the rigid socket is exposed, reversing the traditional positions of pin and socket.
During mating, the socket is guided into the pin insulator by the lead-in chamfer.
The pin is kept from flexing beyond the socket capture radius by the walls of the cavity.
The hemispherical weld of controlled radius at the tip of the pin combines with the lead-in chamfers of the socket contact and the pin insulator to
cam the pin into alignment.
By controlling the welding process and the dimensions of the socket contact and the insulators, it is impossible for the recessed pin to escape the
socket capture radius.
Dimensions are shown in mm (inch)
Dimensions subject to change
139
Microminiature Connectors Type MTB1 Space
Terminations
Harness type insulated cables : AWG 26 to AWG 28, 7 strand, single-core cables.
In this flyback power supply, the X pin is used for current limiting, and the V pin is used for overvoltage detection. When nothing is set, there is no voltage output at the output end of C16 when the...
My friend's company is a global IC giant with more than 40,000 employees worldwide. They have more than 300 engineers. Because the company wants to build this R&D center into the world's largest R&D c...
In circuit design, we usually only care about the quality of the signal. Due to the limitations of simulation analysis software, SI simulation research is often limited to signal lines, and the power ...
I'm working on a project recently, and the code progress is limited. I hope some experts can help me. Paid is also acceptable. The specific requirements are that the FPGA collects 4 channels of 12-bit...
On February 8, according to CCTV News, the European Commission announced the highly anticipated "Chip Act" on February 8 local time, planning to significantly increase the EU's share of global chip p...[Details]
introduction
The voltage regulator provides a continuous and stable voltage to the subsequent circuits. Some applications can accept relatively large voltage fluctuations, while some applica...[Details]
Mengchen Hanzhi from Aofei Temple
Quantum Bit | Public Account QbitAI
What? Xiaomi released a full-size bionic humanoid robot?
Just as Lei Jun was about to end his personal annual...[Details]
Video surveillance is the most important module in the security industry. It is more widely used than other sectors, but it has also developed from single to double, from few to many. As the scope...[Details]
What are the characteristics of AC synchronous motors
The AC synchronous motor is a motor that works according to the principle of electromagnetic induction and has the following characteristi...[Details]
At the beginning of this year, the new coronavirus pneumonia suddenly broke out in our country, causing a huge impact on our country's economic and social operations. Fortunately, the domestic epid...[Details]
With the advancement of science and technology, electric vehicle technology has developed rapidly. Compared with internal combustion engine vehicles, electric vehicles have the advantages of zero e...[Details]
Recently, the reporter learned from Beijing Pony.ai Technology Co., Ltd. (hereinafter referred to as "Pony.ai"), a local enterprise in the district, that it has joined forces with GAC Group to work c...[Details]
The recent decline in lithium prices has reduced production costs. In addition, our company owns lithium mines and lithium carbonate smelters, which can cope with the impact of lithium carbonate price...[Details]
Contents The invention belongs to the technical field of oil field well logging, and in particular relates to a flow meter based on thermodynamics. Background of the Invention When my country's oil...[Details]
Qiu Xiaoxin, CEO of Aixin Yuanzhi, was a guest on China Business Network's "Brainstorm" to interpret female leadership Shanghai, China, March 8, 2023 - Aixin Yuanzhi, an artificial intelligence vis...[Details]
ARM system clock initialization:
This requires knowing what is a clock pulse signal, what is a clock frequency, and what is a clock source.
Clock pulse signal:
Clock pulse ...[Details]
Power technology
京公网安备 11010802033920号
EEWORLD
