In tape & reel packaging a kapton-film is fixed on the top of the spacer for auto-
matic assembly.
During the programming of the Pick and Place machine and the AOI, please
consider the flap of the kapton-film.
DESCRIPTION
Technical Tolerances according to DIN ISO 2768m
In tape & reel packaging a kapton-film is fixed on the top of the spacer to realize
automatic assembly
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. +49 (0) 79 42 945 - 0
www.we-online.com
eiSos@we-online.com
WA-SMSI SMT Steel Spacer, M2.5 Thread
Internal
Order.- No.
SIZE
A4
1.0
REV
2015-03-11
DATE
SSt
BY
SKl
CHECKED
9774040151R
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use.
Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before
the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.
DESCRIPTION
1.0
REV
2015-03-11
DATE
SSt
BY
SKl
CHECKED
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. +49 (0) 79 42 945 - 0
www.we-online.com
eiSos@we-online.com
WA-SMSI SMT Steel Spacer, M2.5 Thread
Internal
Order.- No.
SIZE
A4
9774040151R
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use.
Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before
the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.
H Soldering Specifications:
H1: Classification Reflow Profile for SMT components:
H2: Classification Reflow Profiles
Profile Feature
Preheat
- Temperature Min (Tsmin)
- Temperature Max (Tsmax)
- Time (ts) from (Tsmin to Tsmax)
Ramp-up rate (TL to TP)
Liquidous temperature (TL)
Time (tL) maintained above TL
Peak package body temperature (Tp)
Time within 5°C of actual peak temperature (tp)
Ramp-down rate (TP to TL)
Time 25°C to peak temperature
refer to IPC/JEDEC J-STD-020D
Pb-Free Assembly
150°C
200°C
60-120 seconds
3°C/ second max.
217°C
60-150 seconds
See Table H3
20-30 seconds
6°C/ second max.
8 minutes max.
H3: Package Classification Reflow Temperature
Package Thickness
PB-Free Assembly
PB-Free Assembly
PB-Free Assembly
refer to IPC/JEDEC J-STD-020D
< 1.6 mm
1.6 - 2.5 mm
≥ 2.5 mm
Volume mm³
<350
260°C
260°C
250°C
Volume mm³
350 - 2000
260°C
250°C
245°C
Volume mm³
>2000
260°C
245°C
245°C
DESCRIPTION
1.0
REV
2015-03-11
DATE
SSt
BY
SKl
CHECKED
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. +49 (0) 79 42 945 - 0
www.we-online.com
eiSos@we-online.com
WA-SMSI SMT Steel Spacer, M2.5 Thread
Internal
Order.- No.
SIZE
A4
9774040151R
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use.
Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before
the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.
I Cautions and Warnings:
The following conditions apply to all goods within the product series of WA-SMSI
of Würth Elektronik eiSos GmbH & Co. KG:
General:
All recommendations according to the general technical specifications of the data-sheet have to be complied with.
The responsibility for the applicability of customer specific products and use in a particular customer design is always within the authority of
the customer. All technical specifications for standard products do also apply for customer specific products.
Product Specific:
Follow all instructions in the datasheet, especially:
•The solder profile has to be complied with according to the technical reflow soldering specification, otherwise no warranty will be sustai-
ned. Surface discoloration due to reflow processing is permitted.
•Wave soldering is not applicable. Reflow soldering is recommended.
•All products shall be used before the end of the period of 12 months based on the product date-code, if not a 100% solderability can´t be
ensured.
•The maximum permissible torques must be complied with to prevent mechanical destruction of the elements and PCB.
DESCRIPTION
1.0
REV
2015-03-11
DATE
SSt
BY
SKl
CHECKED
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. +49 (0) 79 42 945 - 0
www.we-online.com
eiSos@we-online.com
WA-SMSI SMT Steel Spacer, M2.5 Thread
Internal
Order.- No.
SIZE
A4
9774040151R
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use.
Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before
the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.
J Important Notes:
The following conditions apply to all goods within the product range of
Würth Elektronik eiSos GmbH & Co. KG:
1. General Customer Responsibility
Some goods within the product range of Würth Elektronik eiSos GmbH & Co. KG contain statements regarding general suitability for certain
application areas. These statements about suitability are based on our knowledge and experience of typical requirements concerning the are-
as, serve as general guidance and cannot be estimated as binding statements about the suitability for a customer application. The responsibi-
lity for the applicability and use in a particular customer design is always solely within the authority of the customer. Due to this fact it is up to
the customer to evaluate, where appropriate to investigate and decide whether the device with the specific product characteristics described
in the product specification is valid and suitable for the respective customer application or not.
2. Customer Responsibility related to Specific, in particular Safety-Relevant Applications
It has to be clearly pointed out that the possibility of a malfunction of electronic components or failure before the end of the usual lifetime can-
not be completely eliminated in the current state of the art, even if the products are operated within the range of the specifications.
In certain customer applications requiring a very high level of safety and especially in customer applications in which the malfunction or failure
of an electronic component could endanger human life or health it must be ensured by most advanced technological aid of suitable design of
the customer application that no injury or damage is caused to third parties in the event of malfunction or failure of an electronic component.
Therefore, customer is cautioned to verify that data sheets are current before placing orders. The current data sheets can be downloaded at
www.we-online.com.
3. Best Care and Attention
Any product-specific notes, cautions and warnings must be strictly observed. Any disregard will result in the loss of warranty.
4. Customer Support for Product Specifications
Some products within the product range may contain substances which are subject to restrictions in certain jurisdictions in order to serve spe-
cific technical requirements. Necessary information is available on request. In this case the field sales engineer or the internal sales person in
charge should be contacted who will be happy to support in this matter.
5. Product R&D
Due to constant product improvement product specifications may change from time to time. As a standard reporting procedure of the Product
Change Notification (PCN) according to the JEDEC-Standard inform about minor and major changes. In case of further queries regarding the
PCN, the field sales engineer or the internal sales person in charge should be contacted. The basic responsibility of the customer as per Secti-
on 1 and 2 remains unaffected.
6. Product Life Cycle
Due to technical progress and economical evaluation we also reserve the right to discontinue production and delivery of products. As a stan-
dard reporting procedure of the Product Termination Notification (PTN) according to the JEDEC-Standard we will inform at an early stage about
inevitable product discontinuance. According to this we cannot guarantee that all products within our product range will always be available.
Therefore it needs to be verified with the field sales engineer or the internal sales person in charge about the current product availability ex-
pectancy before or when the product for application design-in disposal is considered.
The approach named above does not apply in the case of individual agreements deviating from the foregoing for customer-specific products.
7. Property Rights
All the rights for contractual products produced by Würth Elektronik eiSos GmbH & Co. KG on the basis of ideas, development contracts as
well as models or templates that are subject to copyright, patent or commercial protection supplied to the customer will remain with Würth
Elektronik eiSos GmbH & Co. KG.
Würth Elektronik eiSos GmbH & Co. KG does not warrant or represent that any license, either expressed or implied, is granted under any pa-
tent right, copyright, mask work right, or other intellectual property right relating to any combination, application, or process in which Würth
Elektronik eiSos GmbH & Co. KG components or services are used.
8. General Terms and Conditions
Unless otherwise agreed in individual contracts, all orders are subject to the current version of the “General Terms and Conditions of Würth
Elektronik eiSos Group”, last version available at www.we-online.com.
DESCRIPTION
1.0
REV
2015-03-11
DATE
SSt
BY
SKl
CHECKED
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. +49 (0) 79 42 945 - 0
www.we-online.com
eiSos@we-online.com
WA-SMSI SMT Steel Spacer, M2.5 Thread
Internal
Order.- No.
SIZE
A4
9774040151R
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use.
Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before
the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.
Hello, I would like to ask some questions about the 24-bit SDADC of this chip. I am using e2 studio.
1. How can I get the time required to sample and convert a channel in the RA2A1 SDADC routine? I ha...
[size=4]This Sunday is Mother's Day. I would like to wish all mothers in the world a happy holiday. Thank you for your hard work~[/size] [size=4] [/size] [size=4][/size] [size=4] [/size] [size=4]Have ...
In the four-tube buck-boost circuit, the inductor, as the core component of power conversion, is connected in series at the midpoint of the two half-bridge arms. The energy storage and release process...
About the HandbookToday's complex designs no longer allow for manual review and verification of schematics. Xpedition Schematic Integrity Analysis provides fully automated schematic verification while...
[backcolor=rgb(222, 240, 251)]I am working on a project that is battery powered, so low power consumption is required. [/backcolor] [backcolor=rgb(222, 240, 251)]The sleep mode I used originally does ...
Recently, some netizens posted news that Tesla officials said: The 4680 large cylindrical battery has made a major breakthrough, and the production cost has dropped by 54%. In this regard, a reporte...[Details]
On April 16, 2021, Ambarella (NASDAQ: AMBA, a semiconductor company focusing on AI vision chips) announced that it has cooperated with the innovation-leading Great Wall Motors to launch a CV25-based ...[Details]
OFweek Cup · OFweek 2023 China
Robot
Industry Annual Selection (abbreviated as OFweek Robot Awards 2023) is jointly organized by OFweek, China's high-tech industry portal, and its authorita...[Details]
The National Football League (NFL) has widely adopted the Internet of Things (IoT). Here’s how the NFL is using IoT and a great example of how football and IoT can converge. More than just wide rec...[Details]
Samsung Newsroom shared the importance of the Graphics Processing Unit (GPU) and Image Signal Processor (ISP) in Exynos mobile processors (SoC). Samsung Newsroom first met with Mingoo Kim, SoC Deve...[Details]
On the occasion of the 53rd World Earth Day, China Green Development Investment Group Co., Ltd. (hereinafter referred to as "China Green Development") held a series of activities themed "Cherish th...[Details]
1. Overview:
Coordinate transformation is the basis for applying vector control. There are many related literatures and materials. Matlab also has its own module, but generally it just gives a...[Details]
1. Is the higher the resolution, the better?
Resolution is the most basic parameter of a camera. It is determined by the photosensitive resolution used by the camera and is the number of p...[Details]
Under uClinux, there are three main Web Servers: httpd, thttpd and Boa. Httpd is the simplest Web Server with the weakest functions. It does not support authentication and CGI. Both Thttpd and Boa ...[Details]
01
Introduction to Motor Temperature Detection Channel
First, the SINAMICS DCM DC speed control device has the following two channels for collecting DC motor temperature sensor signals.
...[Details]
CAN (Controller Area Network) bus is a communication protocol used in the automotive and industrial automation fields, with high reliability, real-time and flexibility. The transmission rate of CAN...[Details]
NXP's SN110 eSIM family combines eSIM, NFC and secure element into a highly integrated single-chip eSIM solution
Shanghai, China – May 10, 2022 – NXP Semiconductors NV (N...[Details]
The development of modern science and technology has produced many electronic products, which have facilitated our lives and improved our living index. Electronic components are indispensable in el...[Details]
PLC is used to control and automate industrial and manufacturing processes. It is mainly used to monitor, control and optimize machines, equipment and processes that implement various functions, su...[Details]
As the world's population grows and more vehicles are on the road, improvements in traffic safety cannot come fast enough. Although the fatality rate has been reduced by more than half since 2000, fr...[Details]
Renesas Electronics MCUs
京公网安备 11010802033920号
EEWORLD
