Product data sheet
Characteristics
RPM22F7
power plug-in relay - Zelio RPM - 2 C/O - 120 V
AC - 15 A - with LED
Main
Commercial Status
Range of product
Series name
Product or component
type
Device short name
Contacts type and com-
position
Contacts operation
Control circuit voltage
[Ithe] conventional en-
closed thermal current
Status LED
Control type
Coil interference sup-
pression
Utilisation coefficient
Commercialised
Zelio Relay
Power
Plug-in relay
RPM
2 C/O
Standard
120 V AC
15 A at -40...55 °C
With
Pushbutton
Without
20 %
The information provided in this documentation contains general descriptions and/or technical characteristics of the performance of the products contained herein.
This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications.
It is the duty of any such user or integrator to perform the appropriate and complete risk analysis, evaluation and testing of the products with respect to the relevant specific application or use thereof.
Neither Schneider Electric Industries SAS nor any of its affiliates or subsidiaries shall be responsible or liable for misuse of the information contained herein.
Complementary
Shape of pin
[Ui] rated insulation voltage
Flat
300 V conforming to UL
300 V conforming to EN/IEC 60947
300 V conforming to CSA
250 V conforming to IEC
250 V conforming to EN/IEC 60947
4 kV conforming to IEC 61000-4-5
Silver alloy (Ag/Ni)
7.5 A (DC-1) NC conforming to IEC
7.5 A (AC-1) NC conforming to IEC
15 A (DC-1) NO conforming to IEC
15 A (DC-1) conforming to UL
15 A (AC-1) NO conforming to IEC
15 A (AC-1) conforming to UL
10 mA
250 V DC conforming to IEC
250 V AC conforming to IEC
17 V
15 A at 28 V DC
15 A at 250 V AC
420 W, DC circuit
3750 VA, AC circuit
170 mW
<= 18000 cycles/hour no-load
<= 1200 cycles/hour under load
10000000 cycles
100000 cycles for resistive load
1.2 AC 60 Hz
>= 0.15 Uc AC
20 ms between coil energisation and making of the On-delay contact
20 ms between coil de-energisation and making of the Off-delay contact
4430 Ohm, AC circuit at 20 °C +/- 15 %
96...132 V AC
RT I
1
[Uimp] rated impulse withstand voltage
Contacts material
[Ie] rated operational current
Minimum switching current
Maximum switching voltage
Minimum switching voltage
Load current
Maximum switching capacity
Minimum switching capacity
Operating rate
Mechanical durability
Electrical durability
Average consumption in VA
Drop-out voltage threshold
Operating time
Average resistance
Rated operational voltage limits
Protection category
Mar 11, 2014
Operating position
Product weight
Any position
0.036 kg
Environment
Dielectric strength
1550 V AC (between poles)
1550 V AC (between coil and contact)
1500 V AC (between contacts)
EN/IEC 61810-1
UL 508
CSA C22.2 No 14
CSA
GOST
UL
-40...85 °C
-40...55 °C
5 gn (f = 10...150 Hz), amplitude +/- 1 mm (on 10 cycles not operating) conform-
ing to EN/IEC 60068-2-27
3 gn (f = 10...150 Hz), amplitude +/- 1 mm (on 10 cycles in operation) conforming
to EN/IEC 60068-2-27
IP40 conforming to EN/IEC 60529
15 gn for11 ms not operating conforming to EN/IEC 60068-2-27
15 gn for11 ms in operation conforming to EN/IEC 60068-2-27
Standards
Product certifications
Ambient air temperature for storage
Ambient air temperature for operation
Vibration resistance
IP degree of protection
Shock resistance
2
Security Electronics
京公网安备 11010802033920号
EEWORLD
