DATA SHORT
To request the full datasheet, please visit
www.intersil.com/products/isl9519
ISL9519
Narrow VDC Regulator/Charger with SMBus Interface
The ISL9519 is a highly integrated Narrow VDC system voltage
regulator and battery charger controller. Operating parameters
are programmable over the System Management Bus (SMBus).
The ISL9519 is designed for applications where the system
power source is either the battery pack or the output of the
regulator/charger. This makes the max voltage to the system
equal to the max battery voltage instead of the max adapter
voltage. The ISL9519 also includes a patented system to control
trickle charging deeply discharged batteries while maintaining
system voltage at a user defined minimum. High efficiency is
achieved with a DC/DC synchronous-rectifier buck converter,
equipped with diode emulation and variable switching
frequency for enhanced light load efficiency and AC-adapter
boosting prevention. The ISL9519 can charge one, two or three
series connected Lithium-ion cells, at up to 8A charge current.
Default settings for 1-, 2- or 3-cell operation at power-up are
selected by an external pin. Integrated MOSFET drivers and
bootstrap diode result in fewer components and smaller
implementation area. Low offset current-sense amplifiers
provide high accuracy.
The ISL9519 provides an open drain digital output that
indicates the presence of the AC-adapter. The ISL9519 also
provides an analog output that indicates the adapter current.
FN6773
Rev 3.00
March 1, 2012
Features
• ±0.5% System Voltage Accuracy (-10°C to +100°C)
• ±3% Accurate Input Current Limit (-10°C to +100°C)
• ±3% Accurate Battery Charge Current Limit
• Variable Switching Frequency at Light Load Conditions for
Higher Efficiency
• Fixed Frequency Operation at Higher Loads
- Fixed Frequency Mode can be Forced by an External Pin
• Trickle Charge System for Deeply Discharged Batteries
- Automatic Trickle Charge Current (256mA)
- Holds Minimum Voltage to System
• SMBus 2-Wire Serial Interface
• Default System Voltage Values for 1-Cell, 2-Cell or
3-Cell Operation Selected by an External Pin
• Adapter In-rush FET Control
• Adapter Isolation FET Control
• Battery Short Circuit Protection
• Fast System-Load Transient Response
• Monitor Outputs
- Adapter Current (2.5% Accuracy)
- AC-adapter Present Indicator
• 11-Bit Max System Voltage Setting
• 7-Bit Min System Voltage Setting
• 6-Bit Charge Current Setting
- Over 8A Battery Charger Current
• 6-Bit Adapter Current Setting
- Over 8A Adapter Current
• +4.5V to +22V Adapter Voltage Range
• Pb-Free (RoHS Compliant)
Related Literature
• See
AN1562,
“ISL9519EVAL1Z Evaluation Board Setup
Procedure” for applications with adapter voltage > 7V
• See
AN1570,
“ISL9519EVAL2Z Evaluation Board Setup
Procedure” for applications with adapter voltage > 5V
Applications
• Notebook Computers
• Tablet PCs
• Portable Equipment with Rechargeable Batteries
FN6773 Rev 3.00
March 1, 2012
Page 1 of 2
ISL9519
© Copyright Intersil Americas LLC 2009-2012. All Rights Reserved.
All trademarks and registered trademarks are the property of their respective owners.
For additional products, see
www.intersil.com/en/products.html
Intersil products are manufactured, assembled and tested utilizing ISO9001 quality systems as noted
in the quality certifications found at
www.intersil.com/en/support/qualandreliability.html
Intersil products are sold by description only. Intersil may modify the circuit design and/or specifications of products at any time without notice, provided that such
modification does not, in Intersil's sole judgment, affect the form, fit or function of the product. Accordingly, the reader is cautioned to verify that datasheets are
current before placing orders. Information furnished by Intersil is believed to be accurate and reliable. However, no responsibility is assumed by Intersil or its
subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or
otherwise under any patent or patent rights of Intersil or its subsidiaries.
For information regarding Intersil Corporation and its products, see
www.intersil.com
FN6773 Rev 3.00
March 1, 2012
Page 2 of 2