Q1. How to describe P2OUT.3 in IAR, #define LCD_cs1 P2OUT.3; Is it correct?A1: 430 cannot be bit-addressed, so general bit operations are performed through "AND". #define LCD_cs1 (P2OUTBIT3).
Q2. What...
The USB port of the Bull power strip in my hand has been broken for a long time
I chose Bull instead of Xiaomi because I have been using their socket strips and they are of good quality.
This type of ...
This article describes the development of an embedded system for a small, high-performance, ultra-low-cost camera. Initially, a digital signal processor, several ASSPs, and external memory were used. ...
Two-wire bootloader project settings
The CC1310 three-wire bootloader is shown in the left figure below. In addition to the two serial port lines, a dedicated I/O is also required to control the boot ...