Axial Lead Reed Switches
High Power > DRR-DTH
DRR-DTH 39.7mm Standard Changeover Reed Switch
RoHS
Description
The DRR-DTH Reed Switch is a large changeover switch with a 39.67mm long x
5.33mm diameter (1.562” x 0.210”) glass envelope, capable high voltage and
power switching up to 500Vdc at 30W. The DRR-DTH has an insulation
resistance of 10
9
ohms minimum and contact resistance of less than
125 milli-ohms.
The DRT-DTH Reed Swith, another varient of the DRR-DTH, is made for
heavier loads.
Features
Dimensions
Dimensions in mm (inch)
1.83
0.25
(.072) NOM.
(.010) NOM.
1.27
5.54 CL OF OVERLAP
(.050) DIA. REF
.
(.218) MAX.
• Changeover switch
• Capable of switching 500Vdc or
0.5A at up to 30W
• Minimum voltage breakdown
1200Vdc
• Available sensitivity range
50-80 AT
• Minimum voltage breakdown
1200Vdc
27
.66
(1.89) REF
.
Benefits
5.33
(.210) MAX.
1.02
(.040) DIA. REF
.
25.40
(1.000) NOM.
12.45
(.490) NOM.
38.10 - 39.67
(1.500) NOM. - (1.562) MAX.
85.73 - 84.14
(3.375) NOM. - (3.3125) MIN.
• Hermetically sealed switch
contacts are not affected by and
have no effect on their external
environment
• Can be used as changeover or
normally closed contact
• Capable of switching European
mains voltage
• Zero operating power required for
contact closure
Applications
• Security
• Limit switching
• Industrial safety applications
• White goods applications
Switch Type
Contact Form
Materials
C (SPDT-CO)
Body: Glass
Leads: Tin-plated Ni-Fe wire
Note: SPDT-CO = Single-Pole, Double-Throw, Change Over
Electrical Ratings
Contact Rating
1
Voltage
3
Switching
2
W/VA - max.
Vdc - max.
Vac - max.
Vdc - min.
Adc - max.
Aac - max.
Adc - max.
Ω - max.
Ω - min.
pF - typ.
°C
°C
30
500
350
1200
0.50
0.35
3.0
0.125
10
9
2.0
-20 to +125
-65 to +125
Breakdown
Switching
Carry
2
4
Current
3
Resistance
Capacitance
Temperature
Contact, Initial
Insulation
Contact
Operating
Storage
5
Notes:
1. Contact rating - Product of the switching voltage and current should never exceed the wattage rating. Contact Littelfuse for additional load/life information.
2. When switching inductive and/or capacitive loads, the effects of transient voltages and/or currents should be considered. Refer to Application Notes AN108A and AN107 for details.
3. Electrical Load Life Expectancy - Contact Littelfuse with voltage, current values along with type of load.
4. Breakdown Voltage - per MIL-STD-202, Method 301.
5. Storage Temperature - Long time exposure at elevated temperature may degrade solderability of the leads.
© 2015 Littelfuse
Revised: 11/02/15
Specifications are subject to change without notice.
littelfuse.com
Axial Lead Reed Switches
High Power > DRR-DTH
DRR-DTH 39.7mm Standard Changeover Reed Switch
Product Characteristics
Operating Characteristics
Operate Time
Release Time
Shock
2
2
1
1
4.5ms - max.
7.0ms - max.
11ms 1∕2 sine wave
50-2000 Hertz
Hz - typ.
10G - max.
15G - max.
2.75kHz - typ.
Vibration
Resonant Frequency
Magnetic Characteristics
Pull-In Range
3
Ampere Turns
4
50-80
60
L4988
Rating Sensitivity
Test Coil
Ampere Turns
Notes:
1. Operate (including bounce)/Release Time - per EIA/NARM RS-421-A,diode suppressed coil (Coil II).
2. Shock and Vibration - per EIA/NARM RS-421-A and MIL-STD-202.
3. Pull-In Range - Contact Littelfuse for narrower AT ranges available.
4. Rating Sensitivity - The value at which contact ratings and operating characteristics are determined. Derating may be required below this value.
5. Custom modifications of forming and/or cutting of reed switches are available. Please contact Littelfuse.
Drop-Out vs. Pull-In Chart
70
60
Part Numbering System
DRR-DTH-50-80
50
Series
Max.
Drop-Out (AT, L4989 Coil)
40
30
Min.
20
10
0
0
10
20
30
40
50
60
70
80
90
Pull-In (AT, L4989 Coil)
AT Range
50-55 AT
50-60 AT
50-80 AT
55-60 AT
55-65 AT
65-70 AT
65-80 AT
70-75 AT
70-80 AT
75-80 AT
Example:
50-80 AT product is
DRR-DTH-50-80
Note: Chart represents the range of Drop-Out, min to max for a given Pull-In value.
Note: These AT values are the before-modification values of the bare reed switch.
Packaging
Packaging Option
Bulk
Packaging Specification
Bulk
Quantity
1000
Quantity & Packaging Code
N/A
Taping Width
N/A
© 2015 Littelfuse
Revised: 11/02/15
Specifications are subject to change without notice.
littelfuse.com