PIN
RECEPTACLES
FOR .040” - .060” DIAMETER PINS (#03 CONTACT)
FOR .059” - .063” DIAMETER PINS (#42 CONTACT)
0433/8433
.120 DIA.
.105 DIA.
.109 DIA.
.102 DIA.
.031
X433-0-15-XX-03-XX-04-0
Press-fit in .106 mounting hole
0435/0436
043X-0-15-XX-03-XX-10-0
Basic Part
Number
.270
.076 .160
.205
Length
A
Solder mount in .102 min. mounting hole
Also available on 24mm wide carrier tape:
950 parts per 13” reel
Order as: 0435-0-57-XX-03-XX-10-0
C DIA.
Basic Part
Number
Dia.
C
Length
K
0433-0
8433-0
.120
.330
K
.160
.100 DIA.
.255
.290
0435-0
0436-0
.118
.125
.050
.070
.040 DIA.
A
0342
.106 DIA.
0342-0-15-XX-42-XX-10-0
Hex press-fit in .090±.002 plated
through-hole
.050
.150
.210
•
0342 receptacle uses
6342
.106 DIA.
Mill-Max’s new #42 Contact.
This receptacle will accept the
Ø.061 ±.002 power pins of
¼ brick DC/DC converters.
6342-0-15-XX-42-XX-10-0
Hex press-fit in .090±.002 plated
through-hole
.050
.150
.084 DIA.
.094 DIA.
.173
.203
•
6342 receptacle uses
Mill-Max’s new #42 Contact.
This receptacle will accept the
Ø.061 ±.002 power pins of
¼ brick DC/DC converters.
.240
.084 DIA.
.094 DIA.
•
#42 contact can be ordered
in standard receptacles that
use #03 contact; or it can be
specified as the spring
element inside custom made
receptacles.
•
#42 contact can be ordered
in standard receptacles that
use #03 contact; or it can be
specified as the spring
element inside custom made
receptacles.
0434
0434-0-15-XX-03-XX-10-0
Press-fit in .106 mounting hole
Mechanical Data #42 Contact:
Insertion/Extraction Force
with a Ø.061 (nominal) pin:
First Cycle
Insertion Force
Extraction Force
20N
6N
2nd & Subsequent Cycles
Insertion Force
Extraction Force
10N
6N
.120 DIA.
.105 DIA.
.109 DIA.
.102 DIA.
.031
.076 .160
.205
.270
Compliancy Test
(the “spring back” characteristic of the contact to accept
Ø .059 small pin after insertion of a Ø.063 large pin) :
Initial Cycle with Ø.059 pin
Ins. Force
Ext. Force
18N
6N
Second Cycle with Ø.063 pin
Ins. Force
Ext. Force
22N
7N
Third Cycle with Ø.059 pin
Ins. Force
Ext. Force
3N
2N
(Insertion/Extraction Forces are in Newtons and measured with polished
steel gage pins having elliptical shaped tips).
PAGE 188 | PIN RECEPTACLES
SPECIFICATIONS:
Shell Material:
Brass Alloy 360, 1/2 Hard
Contact Material:
Beryllium Copper Alloy 172, HT
Dimensions: Inches
Tolerances On:
Lengths:
± .005
2011/65/EU
ORDER CODE: XXXX - X - XX - XX -
XX
- XX - XX - 0
BASIC PART #
SPECIFY SHELL FINISH:
01
200
μ”
TIN/LEAD OVER NICKEL
80
200
μ”
TIN OVER NICKEL (RoHS)
15
10
μ”
GOLD OVER NICKEL (RoHS)
SPECIFY CONTACT FINISH:
01
200
μ”
TIN/LEAD OVER NICKEL
80
200
μ”
TIN OVER NICKEL (RoHS)
27
30
μ”
GOLD OVER NICKEL (RoHS)
Diameters: ± .002
Angles:
±2°
RoHS - 2
SELECT CONTACT:
#03 or #42
CONTACT (DATA ON PAGE 259)
Mill-Max Mfg. Corp. • 190 Pine Hollow Road, P.O. Box 300, Oyster Bay, NY 11771 • 516-922-6000 • Fax: 516-922-9253 • www.mill-max.com