Amphenol
IDS-34-2
®
ePower Connectors
The ePower series of connectors are designed for the
demanding requirements of hybrid, electric vehicles, and
utility truck electrical systems, operating at 800vdc to
1000vdc with a 200A to 500A rating. The product
incorporates the patented RADSOK
®
technology for higher
amperage, lower T-rise, less resistance and mating force.
Meantime, it offers a 40% smaller footprint than three EMI
shielding cable glands and easier operation of termination
with shielded cable by a washer compressing the shield to
the inside surface of the shell. The connector series covers 2
or 3 power contacts. As an example, one ePower 400A
connector can replace three conventional connectors, saving
space and cost.
Features:
• Two or three circuit power
• Crimp, lug or bus bar termination
• IP2X on pin and socket
• Environmental IP67 rating
• Two HVIL circuits
• 1,000vdc rating
• 5.7mm - 14mm RADSOK® technology for 200 to 500A
current capability
• Strain relief for jacketed cable incorporated into shell
• Integrated EMI shielding
• Excellent vibration resistance
• All aluminum shell
www.amphenol-industrial.com
The markets and application for the ePower series include but are not limited
to the following found in both the Military Aerospace and Industrial segments:
• Power converters
• Hybrid electric vehicles
• Heavy equipment electrification
• Two and three phase motors
• Starter generators
Receptacle
Plug
How to order
1
e
Product line
e
ePower
P
2
P
Connector
Plug
2
3
2
Amp Level
200A
2
4
2
Number of Poles
2 Pole
BB
5
25
Wire Size
Busbar (Receptacle Only)
1
6
1
Key Position
Available in 2 & 3 Pole
1
7
1
Plating
Electroless Nickel
R
Receptacle
4
400A
3
3 Pole
25
35
25 mm
2
(200A Only)
35 mm
(200A Only)
2
2
3
Available in 2 & 3 Pole
Available in 2 & 3 Pole
FG
B
Tin over Nickel
No Plating
50
70
50 mm
(200A or 400A)
70 mm
(400A Only)
2
2
2
4
5
Available in 2 & 3 Pole
Available in 3 Pole Only
95
95 mm
(400A Only)
6
7
Available in 3 Pole Only
Available in 3 Pole Only
8
The information contained in this data sheet is for reference only.
Available in 3 Pole Only
Notice: Specifications are subject to change without notice. Contact your nearest Amphenol Corporation Sales Office for the latest specifications. All statements, information and data given herein are believed to be accurate and reliable but are presented
without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements of suggestions concerning possible use of our products are made without representation or warranty that any such use is free of patent infringement and are not
recommendations to infringe any patent. The user should assume that all safety measures are indicated or that other measures may not be required. Specifications are typical and may not apply to all connectors.
AMPHENOL is a registered trademark of Amphenol Corporation.
For further information on your individual application requirements, contact: Amphenol Corporation
North America:
Amphenol Industrial Operations
180 N. Freeport Drive, Plant 4
Nogales, AZ 85621
Tel: (520) 285-5130
Fax: (520) 285-5134
Email: tech@amphenol-aio.com
Europe:
Amphenol Industrial Operations Europe
Via Barbaiana 5
1-20020 Lainate (MI) Italy
Tel: +39 02 93254.204
Fax: +39 02 93254.444
Email: info@amphenol-aio.com
Middle East:
Amphenol Middle East Enterprises FZE
Office C-37 PO Box 21107
Ajman Free Zone, UAE
Tel: +9 716-7422494
Fax: +9 716-7422941
Email: jhussain@amphenol-industrial.com
Asia:
Amphenol Technology Shenzhen Ltd
Block 5 Fuan 2nd Industrial Park
Dayang Rd, Fuyong Baoan
Baoan, Shenzhen, China 518103
Tel; +86 755 2881 8389
Fax; +86 755 2991 8310
Email: enquiry@amphenol-aio.com
FPGA/CPLD
京公网安备 11010802033920号
EEWORLD
