Page 1 of 4
EDM2-ELF - Carrier Board for EDM Type 2 Compact Module
Key Features
Develop your mobile embedded device quickly with the Elf EDM Carrier Board which features a variety
of sensors and interconnects.
HDMI, TTL and LVDS display interfaces.
Communication by dual PCI Express (with SIM cardslots).
Dual CAN Bus, Dual UART, USB and 8 GPIO’s for Industrial control.
Interface Overview
Block Diagram
Page 2 of 4
Specifications
System on Module
EDM Type 2 compact form factor
Expansion
Expansion Slots
2x mini-PCIe + SIM cardslot
(for 3G communication)
I/O Interfaces
Connector
1x SATA
1x micro SD cardslot (SDIO)
1x Gigabit LAN
2x USB 3.0 Host
1x micro USB 3.0 / 2.0 OTG
1x UART (RS-232/422/485)
2x CAN Bus
1x UART (RS-232)
2x SPI
8x GPIO
2x I2C
Manafacturing pins
Header
Video
Connector
1x HMDI
2 channel LVDS 18/24 bit
Audio
Codec
Jumper selectable:
Freescale SGTL5000 (I
2
S),
TI TLV320AIC23B (I
2
S)
1x 3.5 mm jack Stereo Audio in
1x 3.5 mm jack Stereo Audio out
1x 3.5 mm jack Microphone
S/PDIF
2W amplified speaker connectors
Connector
Speaker
Touch
Controller
Connector
TSC2046 (4 wire by SPI)
4 wire touch panel
Sensors
3-axis Movement
Light Sensor
Compass
Real Time Clock
ST Microelectronics LIS331DLH
Intersil ISL29023IROZ-T7
Freescale MAG3110FCR1
Maxim integrated DS1337+
Power Specifications
Input Power Requirements
12 VDC +/- 5%
Page 3 of 4
Battery
Smart battery connector
Environmental and Mechanical
Temperature
Commercial : 0° to 60° C
Extended : -20° to 70° C
Industrial : -40° to 85° C
10 - 90%
314 pins MXM3
3.5" Form Factor
147 x 102 mm
5¾ x 4 inch
>100,000 hours
115 grams
50G / 25ms
20G / 0-600 Hz
Compliant with CE, FCC, RoHS, REACh directives
Humidity
Module Connector
Form Factor
Dimensions
MTBF
Weight
Shock
Vibration
Certification
Dimensional Drawing
All dimensions are in mm
Page 4 of 4
Ordering Information
EDM2-ELF
3.5 inch form factor Elf carrier board for EDM type 2 system-on-modules
EDM2-ELF-START
Elf EDM type 2 evaluation board including cablekit and adaptor
http://www.technexion.com/products/edm/edm-carrier-boards/edm2-elf
5/13/2015